MITUTOYO | Product Information

Caliper Type Outside Micrometer

The standard type can measure a part to which the anvil may not access.

Specifications

Fixed Anvil Type Screw Thread Micrometer

For measurement of the pitch diameter of thread
Fixed anvil

Specifications

Interchangeable Tip Type Screw Thread Micrometer

For measurement of the pitch diameter of thread
Interchangeable anvils depending on the screw shape

Specifications

Non Rotating Spindle/Interchangeable Type Universal Micrometer

Supports measurement of various shapes with 7 types of interchangeable anvils.
An anvil dedicated to screw threads is also available.

Specifications

Three-wire Unit

For measurement of the pitch diameter of thread

Specifications

Tooth Thickness Micrometer

Measures the "root tangent length" of gears.
Compatible modules differ depending on the model.

Specifications

Ball Anvil Type Gear Micrometer

Used for "over-pin diameter measurement" of gears
A ball anvil is selected according to the gear.

Specifications

Non Rotating Spindle Type Tooth Thickness Micrometer

Measures the "root tangent length" of gears.
Compatible modules differ depending on the model.

Specifications

Non Rotating Spindle Type Paper Micrometer

Micrometer dedicated to measuring paper thickness
Anvil diameter: 14.3mm

Specifications

U-shape Frame Sheet Metal Micrometer

U-shape frame micrometer used for measuring steel sheets

Specifications

Dial Type Sheet Metal Micrometer

Easy reading structure that allows measurement read from the ratchet side
Convenient for steel sheet measurement.

Specifications

Spherical-flat Anvil Type Micrometer

The measuring face on the anvil side is spherical shaped.

Specifications

Spherical Anvil and Spindle Type Micrometer

Both measuring faces are spherical shaped.

Specifications

Spherical and Cylindrical Anvil Type Micrometer

Provided with various rod-shape anvils.

Specifications

Spline Micrometer

Both measuring faces are slimed.
Convenient for measuring round groove diameter etc.

Specifications

Point Micrometer

Both measuring faces are taper-shaped.
Convenient for measuring fine parts.

Specifications

V-anvil Micrometer

Measures the diameter of cylinders that have odd-numbered flutes.
Convenient for measuring taps‚ reamers‚ etc.‚ with odd-numbered flutes.

Specifications

Non Rotating Spindle Type Blade Micrometer

Both measuring faces are blade-shaped.
Optimal for measurement of arrow grooves etc.

Specifications

Can Seam Micrometer

Dedicated to measuring the edge height etc. of can seams.

Specifications

Hub Micrometer

Dedicated to measuring the length and thickness of steps in a pipe.

Specifications

Crimp Height Micrometer

Measuring face shape dedicated to measuring the crimp height of solderless terminals.

Specifications

Uni Micrometer

The tips on the anvil side are interchangeable.
Interchangeable anvils are available.

Specifications

Limit Micrometer

Used as a limit gage with two micrometer heads.

Specifications

Indicating Micrometer

An anvil displacement is displayed on the indicator.
Optimal for measurement of large item small scale production parts on shop floors.

Specifications

Snap Meter

Optimal for continuous measurement of mass production parts

Specifications

Snap Meter with External Indicator

Optimal for continuous measurement of mass production parts
The indicator can be selected for any model.

Specifications

Groove Micrometer

Micrometer dedicated to groove width measurement

Specifications

Quick-Mini

Handy type dedicated to small part measurement
Optimal for hobby use etc.

Specifications

Telescoping Gage

Comparison measuring tool for inside diameter groove width etc.
Measuring range: 8 to 150mm with 6 models

Specifications