D-7DMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.CalipersAn industry standard measuring toolABSOLUTE Digimatic Caliper500 Series —with exclusive ABSOLUTE Encoder Technology• An ABSOLUTE electromagnetic induction linear encoder system is incorporated.• New ergonomic design with nger rest.• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale for comparison measurements. This button will also allow return to the absolute (ABS) mode and display of the true position from the origin (usually jaws closed point).• Large and clear LCD readout.• Smooth slider movement makes for comfortable operation.• Extended battery life of Approx. 5 years due to low current integrated circuit (except for 0 - 300 mm/0 - 12 inch models).• Allows step measurement.• Carbide-tipped jaw calipers are optimal for rough nished parts, castings, grinding stones, etc.• Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page A-3.A built-in ABS (absolute) scale means that these calipers are ready to use immedi-ately after power-on without origin resetting – just like using a vernier caliper.Optional accessories959143: Data hold unit Data hold unitConnecting cables for IT/DP/MUX959149: SPC cable with data button (1 m)959150: SPC cable with data button (2 m)16.38mmmmPower OFFPower ONNo originsetting16.38Power OFFPower ONNo originsettingDedicated for the models equipped with a digimatic output function. For details, refer to page D-38. An inspection certicate is supplied as standard. Refer to page U-11 for details.Technical Data• Accuracy:±0.02 mm (≤200 mm), ±0.03 mm (≤300 mm) (excluding quantizing error)• Resolution:0.01 mm or 0.0005 in/0.01 mm• Repeatability: 0.01 mm• Display:LCD• Scale type:ABSOLUTE electromagnetic induction linear encoder• Max. response speed: Unlimited• Battery: SR44 (1 pc), 938882, for initial operational checks (standard accessory)• Battery life: Approx. 5 years under normal use Smooth slider movement makes forcomfortable operation.High quality guide surface nish for smooth slider movementDirection of the lengthConventional ex. No.500-151ABSOLUTE Digimatic Caliper ex. No.500-151-30Ra: 0.126 μmRa: 0.071 μmDirection of the length500-151-30500-182-30Remarkably easy to read displayActual sizeProducts equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).Connecting unit for U-WAVE-TC: 02AZF300 (Buzzer type)Note: IP67 model is water/dust-proofed suitable for the factory oor. Buzzer type is not water/dust-proofed.Refer to page A-15 for details.500-153-30USB Input Tool Direct06AFM380C: SPC cable for USB-ITN-C (2 m)Connecting cables for U-WAVE-T 02AZD790C: SPC cable with data button (160 mm)02AZE140C: SPC cable for foot switchWireless data output U-WAVE-TC: 264-620 (IP67 type) 264-621 (Buzzer type)

元のページ  ../index.html#230