D-27DMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.CalipersAn industry standard measuring tool• Specially designed for hole Center-to-Center measurements on the same, or offset, planes. • Digimatic models are IP67 Absolute type. No need to reset the origin after switching on. (Refer to page D-8 for a description of Absolute measurement.)• Direct reading of pitch measurements is available due to the offset-value setting function.• Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page A-3.Offset Centerline CaliperSERIES 573, 536 —ABSOLUTE Digimatic and vernier types536-105DIMENSIONS Unit: mmRange (mm)HWtApplicable hole10 - 1501675 3ø1.5 - ø9.5 mm10 - 20010 - 30020100 3.8RangeHWtApplicable hole10 - 160 mm/0.4 - 6.4 in16 753.5ø1.5 - ø9.5 mm10 - 210 mm/0.4 - 8.4 in10 - 310 mm/0.4 - 12.4 in201003.8SPECIFICATIONSMetric Digimatic modelOrder No.Range (mm)Accuracy (mm)573-605-2010.1 - 160±0.03573-615-20*10.1 - 160±0.03573-606-2010.1 - 210±0.03573-616-20*10.1 - 210±0.03573-60810.1 - 310±0.04573-618*10.1 - 310±0.04* Without thumb rollerInch/Metric Digimatic modelOrder No.Range (in)Accuracy (in)573-705-200.404 - 6.4±0.0015573-706-200.404 - 8.4±0.0015573-7080.404 - 12.4±0.0015Metric Analog modelOrder No.Range (mm)Accuracy (mm)536-10510.1 - 150±0.05536-10610.1 - 200±0.05536-10710.1 - 300±0.08Example 1)Example 2)Technical Data• Accuracy:Refer to the list of specications. (excluding quantizing error for Digimatic models)• Resolution*1: 0.01 mm or 0.0005 in/0.01 mm• Graduation*2: 0.05 mm• Display*1:LCD• Scale type*1: ABSOLUTE electromagnetic induction linear encoder• Max. response speed*1: Unlimited• Battery: SR44 (1 pc), 938882, for initial operational checks (standard accessory)• Battery life*1:Approx. 5 years under normal use (Approx. 1 year: 310 mm model)• Dust/Water protection level*1: IP67 (IEC 60529)*3 *1 Digimatic models *2 Analog models *3 Rustproong shall be applied after use if caliper was in contact with coolant. Optional Accessories for Digimatic Models For details, refer to page D-38.• 959143: Data hold unit • Connecting cables for IT/DP/MUX 05CZA624: SPC cable with data button (1 m) 05CZA625: SPC cable with data button (2 m)• USB Input Tool Direct 06AFM380A: SPC cable for USB-ITN-A (2 m)• Connecting cables for U-WAVE-T 02AZD790A: SPC cable with data button (160 mm) 02AZE140A: SPC cable for foot switchWireless Data Output • U-WAVE-TC: 264-620 (IP67 type) 264-621 (Buzzer type)• Connecting unit for U-WAVE-TC: 02AZF310 (IP67 type) Note: IP67 model is water/dust-proofed suitable for the factory oor. Buzzer type is not water/dust-proofed.Refer to page A-15 for details. Note: cannot be used with 573-708-20• 05FAJ735: Inspection Equipment for Offset Caliper0000045042(250)(40)(30)(25)(10)050±0.015100±0.015150±0.0154−ø5Unit: mmCompensation value573-605-20WH1010ø130tWH1010ø130tProducts equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).Digimatic modelAnalog model

元のページ  ../index.html#250