D-61DMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.• Measuring rod diameter: 4 mm • Measuring rod lock is attached.Note: Measuring rod is attached on the rear side of the micrometer. • Carbide-tipped measuring rod model is available.• Ratchet stop provides constant measuring force.Depth MicrometerSERIES 128 • The Depth Micro Checker is designed to check and help set the range-end points of a depth micrometer.Depth Micro CheckerSERIES 515 515-571515-5703002752502252001751501251007550259292345915012510075502591672180Depth GageA standard measuring tool of industryAn inspection certicate is supplied as standard. Refer to page U-11 for details.DIMENSIONS Unit: mm128-102128-101SPECIFICATIONSMetricOrder No.Range (mm)Graduation (mm)Base (mm)128-1010 - 250.01 63.5×16128-103*128-102101.6×16128-104** With carbide-tipped measuring rodInchOrder No.Range (in)Graduation (in)Base (in)128-1050 - 10.0012.5×0.63128-1064×0.63Technical Data• Accuracy: ±3 μm (±0.00015 in) • Flatness of reference face: 1.3 μm (0.00005 in) for 63.5 mm (2.5 in) length base, 2 μm (0.00008 in) for 101.6 mm (4 in) length base• Flatness of measuring spindle face: 0.3 μm (0.000012 in)• Standard Accessories: 301336 SpannerInchOrder No.Range (in)Block pitch accuracyAnvil block accuracy (μinch)515-5750 - 6±(40+L/0.15) μinch, L = Length to check (inch)±20SPECIFICATIONSMetricOrder No.Range (mm)Block pitch accuracyAnvil block accuracy (µm)515-5700 - 150±(1+L/150) µm, L = Length to check (mm)±0.5515-5710 - 300515-570515-571A 25 mm anvil block provides the reference surface for the depth micrometer rod

元のページ  ../index.html#284