E-21EMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.• Square gauge block sets have several unique characteristics (refer to page E-4 for details.). A wide choice is provided to best match the target applications: sets containing from 2 to 112 blocks are available.• Mitutoyo accessory sets are available for expanding the range of square gauge block applications, especially for rapid assembly of precision gages.Metric/Inch Square Gauge Block SetsSERIES 516 — Metric Block Sets, Long Block Sets, Wear Block SetsSteel 103-block setSteel 76-block setSteel 47-block setWear block set Tungsten Carbide The wear to a frequently used square gauge block set can be drastically reduced by using tungsten-carbide wear blocks on the ends of a stack. There are two types available, of nominal dimensions 1 mm and 2 mm. These blocks are much more wear-resistant than steel blocks, and they also absorb most of the wear that would otherwise occur to the blocks in the set due to contact, and therefore maximize the set's longevity. Wear blocks are relatively inexpensive and can be readily discarded when no longer serviceable. To achieve maximum protection, the same face of each wear block should always be wrung to a set block, so the opposite, wearing, face never touches a set block.Steel 8-block setGauge BlocksLength Standards Brought to You by MitutoyoAn inspection certicate is supplied as standard. Refer to page E-4 for details.Steel 112-block setLong block setSteel 32-block set

元のページ  ../index.html#312