F-5FMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.• Cost-effective oriented designID-SX indicators use a button-type battery (SR44) and come with the minimum of functionality for ease of use. There is a choice of models in the lineup allowing selection of 0.01 mm, 0.001 mm or inch-based measurement resolutions.• IP53 dust/water protection levelThe models listed below also provide IP53 dust/water protection level specications: 543-794/94B/95/95B/96/96B• ABS (absolute) scaleThese Digimatic indicators employ Mitutoyo’s proprietary ABS (absolute) scale, which makes it possible to restore the origin point even if the power is turned off. This eliminates the need to perform origin restoration each time the power is turned on. Furthermore, this scale ensures that overspeed errors do not occur, which improves reliability.• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems (refer to page A-3).Technical Data• Display: 6-digit LCD, sign• Usable orientation: All• Scale type: ABSOLUTE electrostatic linear encoder• Battery: SR44 (1 pc.), 938882 for initial operational checks (standard accessory)• Maximum response speed: No limit (except for scanning measurement)Functions• Origin set (Zero-setting) • Direction switching• Data output• Low battery voltage alarm display• Error alarm displayOptional Accessories• Lifting Lifting lever21EZA198 (ISO/JIS/DIN Type), 21EZA199 (ASME/ANSI/AGD Type) Lifting knob21EZA105 (ISO/JIS/DIN Type), 21EZA150 (ASME/ANSI/AGD Type) Lifting cable 540774 • SPC Cable: 905338 (1 m) 905409 (2 m)• USB Input Tool Direct (2 m): 06AFM380F Note: Please separately purchase USB-ITPAK since there is no data output switch on the measurement instrument.Refer to pages A-13, A-20 to A-22 for details.• Input Tool Series IT-016U (USB Keyboard Signal Conversion Type): 264-016-10 IT-007R (RS-232C Communication Conversion Type): 264-007 Refer to page F-66 for details.• Connecting Cables for U-WAVE-T (160 mm): 02AZD790F For foot switch: 02AZE140F Refer to page F-66 for details.• Digimatic Mini-Processor DP-1VA LOGGER: 264-505• Contact points for Mitutoyo’s dial indicators (Refer to pages F-57 to F-60 for details.)• Interchangeable backs for 2 series (Refer to page F-61 for details.)• Measuring stands (Refer to pages F-84 to F-92 for details.)IP53 dust/water protection levelLevel 5: Dust protectionWhile complete protection against intrusion of dust is not provided, protection is adequate to prevent dust intrusion in amounts that would inhibit the prescribed operations and safety of the electronic equipment.Level 3: Protection against spraying waterThe product suffers no harmful effects when subjected to water sprayed at an angle of up to 60 degrees on both sides.For details on the dust/water protection level test conditions, refer to IEC 60529: 2001 and JIS C 0920: 2003.IP code is the degree of protection against the intrusion of solid foreign objects and water.Mitutoyo offers a lineup of coolant proof, ID-N/B indicators that have excellent resistance to oil, water and dust and so are suitable for use in environments that include splashing cutting uid.Inch/MetricOrder No.RangeResolutionAccuracy*1Back typeMeasuring force (N)Battery life*3Dust/Water protection level*4Overall*2HysteresisRepeatability543-7910.5 in/12.7 mm0.00005 in/0.001 mm±0.0001 in/0.003 mm0.0001 in/0.002 mm0.0001 in/0.002 mmWith lug1.5 or less18,000 hours(Continuous use)Approx. 5 years(Normal use)IP42543-791BFlat543-792With lug543-792BFlat543-7930.0001 in/0.001 mmWith lug543-793BFlat543-7950.00005 in/0.001 mmWith lug2.5 or lessIP53543-795BFlat543-796With lug543-796BFlat543-7820.0005 in/0.01 mm±0.0010 in/0.02 mm0.0010 in/0.02 mm0.0005 in/0.01 mmWith lug1.5 or less20,000 hours(Continuous use)Approx. 5 years(Normal use)IP42543-782BFlat543-783With lug543-783BFlat*1 These values apply at 20 ºC, and quantizing error of ±1 count is excluded. *2 Overall magnication and linearity. *3 The battery life varies, depending on the number of times the Digimatic indicators are used as well as the way it is used. The values listed above are approximations.*4 This is only valid when the data socket cover is in place. Does not apply if the cover is removed, a lifting accessory is attached, or a connecting cable is attached.Note: Regarding origin setting, refer to “Origin Setting of Digimatic Indicators” on page F-25.SPECIFICATIONSMetricOrder No.Range (mm)Resolution (mm)Accuracy*1 (mm)Back typeMeasuring force (N)Battery life*3Dust/Water protection level*4Overall*2HysteresisRepeatability543-79012.70.0010.0030.0020.002With lug1.5 or less18,000 hours(Continuous use)Approx. 5 years(Normal use)IP42543-790BFlat543-794With lug2.5 or lessIP53543-794BFlat543-7810. lug1.5 or less20,000 hours(Continuous use)Approx. 5 years(Normal use)IP42543-781BFlat543-781ID-S1012X543-790ID-S112X543-794ID-S112PXABSOLUTE Digimatic Indicator ID-SXSERIES 543Digimatic IndicatorsComparison measuring instruments which ensure high quality, high accuracy and reliability.An inspection certicate is supplied as standard. Refer to page U-11 for details.Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details). ISO/JIS/DIN Type ASME/ANSI/AGD type

元のページ  ../index.html#344