F-25FMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Digimatic IndicatorsComparison measuring instruments which ensure high quality, high accuracy and reliability.EC CounterSERIES 542 —Low-cost, Modular Type Display Unit• –NG, OK and +NG tolerance judgment results can be displayed. • Can be set to produce either tolerance judgment output or Digimatic output. • Small size (96×48 mm) which conforms to DIN standards. 676.696484844.4パネルカット寸法92+0.8045+0.8091.4DIMENSIONS542-007Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).Function• Preset• Tolerance judgment (3 steps)SPECIFICATIONSOrder No.542-007*Quantizing error±1 countResolution( ) indicates maximum display range0.01 mm (±9999.99)/0.0005 in (±99.9995 in)/0.001 in (±999.999 in)0.001 mm (±9999.999)/0.00005 in (±9.99995 in)/0.0001 in (±99.999 in)[automatic setting by gage]Tolerance judgment displayLED display (3 steps: Amber, Green, Red)External output (switching type)Tolerance judgment output–NG, OK, +NG (open-collector)Data outputDigimatic outputControl inputExternal PRESET, external HOLDOperation temperature range 0 - 40 °C (RH 20 to 80 %, no condensation)Storage temperature range–10 to 50 °C (RH 20 to 80 %, no condensation)External dimensions96 (W) × 48 (H) × 84.6 (D) mmAC adapter/AC cableAC adapter: (Japan/North America) 06AEG302JA/(EU) 06AEG302D/(Britain) 06AEG302E/(Korea) 06AEG302K/(China) 06AEG302DCMass220 g* To denote your AC power cable add the following suffixes to the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, K for KC, C and No suffix are required for PSE.Unit: mmThe stability of measurement within 0.2 mm from the start of spindle travel is not guaranteed, so this region should not be used during operation.Origin setting of Digimatic Indicators0.2 mmSupplemental information on Digimatic Indicators

元のページ  ../index.html#364