F-67FMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.• Designed to probe surfaces that cannot be reached with a normal dial gage. Useful both for alignment and for measurement purposes.• Mitutoyo’s proprietary new design permits smooth pointer operation.• Strong frame provides excellent rigidity and durability.• The pointer and carbide contact are only slightly magnetizable*, and so they are hardly affected by a magnetic environment. In addition, models with a ruby contact point are available. The ruby contact point also has several times the abrasion resistance of carbide contact point and is safely usable with an electric discharge machine thanks its being a non-conductor.• Clear and concise wide dial face allows excellent visibility.• The surface of the crystal is hard-coated for excellent scratch resistance.• Flat crystal makes graduations easy to read. Moreover, the O-ring sealing method used for the bezel prevents water or oil penetration. (Note that this type is NOT waterproof.)• Six types are available: horizontal, horizontal (20° tilted face), vertical, parallel, universal, and pocket, allowing users to select the model most suited to their needs. · Horizontal: Standard· Horizontal (20° Tilted Face): Dial face inclined 20° compared with the vertical type, allows easy reading.· Vertical: Best suited for centering holes under the spindle of a machine tool.· Parallel: The scale can be read from the front, with the stylus pivoting in a plane parallel to that of the dial face. · Universal: The direction of the probe movement can be freely changed.* Magnetic material is used for some internal parts.SERIES 513 — Dial Test Indicator FeaturesDial Test IndicatorsComparison measuring instruments which ensure high quality, high accuracy and reliability.Feature iconsIconFeature descriptionHigh accuracyWith revolution counterLong contact pointStandardDouble scale spacing CompactCarbide contact point (Slightly magnetic)Ruby contact point(Non-conductive and abrasion resistant)Horizontal (20° Tilted face)ParallelHorizontalVerticalBonded bezel and crystal prevents detachmentMulti-layer coatings on the crystalExcellent dial readabilityNo dust or oil penetrationScratch resistant coatingImproved contact point bearing gives smoother trackingContact pointNaming of partsCrystalBezelMovementCoverContact point (on stylus)FrameDovetailOld design: contact point held in frame.New design: contact point held in sub-plate provides smoother tracking action.UniversalAn inspection certicate is supplied as standard. Refer to page U-11 for details.