G-16GMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Function• Preset• Tolerance judgment output (3/5-step, 7 kinds)• Limit value output (2 kinds independently for each of the 7 channels)• Peak (max., min., runout) measurement• Diverse data output (Serial BCD, Simplied analog, Digimatic)Optional Accessories• I/O output connector (with cover): 02ADB440• AC adapter: 357651• AC cable (Japan): 02ZAA000*• AC cable (USA): 02ZAA010*• AC cable (EU): 02ZAA020*• AC cable (UK): 02ZAA030*• AC cable (China): 02ZAA040*• AC cable (Korea): 02ZAA050*• Terminal connecting cable: 02ADD930*• External switch boxThe tolerance values or preset values can be easily input.02ADF180 (with 2 m cable) * Required when using AC adapter.EB CounterSERIES 542 — Panel mount, Multi-function Type•Produces 3-step/5-step, 7 kinds of tolerance output and limit value output independently for each of 7 channels.•Comes with serial BCD output capability, for connection to a programmable controller or personal computer, etc.•Dynamic measurement possible with simplied analog output.•Employs DIN size (96×48 mm) and mount-on-panel conguration to facilitate system integration.542-092-2542-094-2542-093-2542-092-2SPECIFICATIONSOrder No.542-092-2542-094-2542-093-2Quantizing error±1 countMaximum input frequency1.25 MHz (2-phase square wave), response speed depends on gage specification.Response speed depends on gage specification.Resolution( ) indicates maximum display range0.01 mm (±9999.99 mm)/0.0005 in (±99.9995 in) 0.005 mm (±9999.995 mm)/0.00005 in (±9.99995 in)0.001 mm (±999.999 mm)/0.00005 in (±9.99995 in) 0.0005 mm (±99.9995 mm)/0.000005 in (±0.999995 in) 0.0001 mm (±99.9999 mm)/0.000005 in (±0.999995 in)0.01 mm (±9999.99 mm)/0.0005 in (±99.9995 in) 0.005 mm (±9999.995 mm)/0.00005 in (±9.99995 in)0.001 mm (±999.999 mm)/0.00005 in (±9.99995 in)0.0005 mm (±99.9995 mm)/0.000005 in (±0.999995 in)0.0001 mm (±99.9999 mm)/0.000005 in (±0.999995 in)[Automatic setting by gage]Tolerance judgment displayLED display (3 steps: Amber, Green, Red/5 steps: Amber, Amber flashing, Green, Red flashing, Red)Input/outputTolerance judgment outputL1 to L5, open-collectorControl outputNormal operation signal (NOM), open-collectorControl inputPresetting, display hold, peak value clear, tolerance judgment BANK switch, open-collector or no-voltage contact signal (with/without contact point)InterfaceSerial BCDBit serial format, open-collectorAnalog output2.5 V+Counting value× Voltage resolution (25 mV/2.5 mV): Full-scale 0 to 5 VDigimatic input/output • Connecting to the external switch box (02ADF180) makes it easy to enter tolerance limits and preset values. Note) This function is not available when the gage is connected to Digimatic Mini-Processor DP-1VA LOGGER (264-505). • It can be connected to DP-1VA LOGGER (264-505) and to IT-016U.Power supply Voltage12 to 24 V DC, terminal block (M3 screw)Consumption6 W or less (500 mA max.)Ensure at least 1 A is available per unit.Operating temperature (humidity) ranges0 to 40 °C (RH 20 to 80 %, non-condensing)Storage temperature (humidity) ranges –10 to 50 °C (RH 20 to 80 %, non-condensing)Applicable gage headLGF, LGK, LGB, LG*Models with reference point mark is excluded.LGF with reference point markLGD, LGS, IDMassApprox. 400 gApprox. 400 gApprox. 400 g* When a gage of 0.1 µm resolution is connected, the maximum display range will be ±99.9999.Unit: mmDIMENSIONS137(11)6.691.444.496154.64896BANKFnEB-□P.SETMODE******INPUT+VDC IN 12-24V 500mA-VOUTPUTUNITMAXMINTIRL1L7+/-BANKRefer to the Linear Gage Brochure (No. E13007) for more details.

元のページ  ../index.html#451