G-38GMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.XY Measurement (X–Y): atness (X+Y)/2: average Note: XY requires 10 mm-interval.Parallel MeasurementOptional AccessoriesSERIES 544 — Laser Scan Micrometer (Display Unit)•2-channel Digimatic code output•In simultaneous measurement, measurement data are output as follows: Program No. 0 to No. 4 in OUTPUT-1 Program No. 5 to No. 9 in OUTPUT-2 (10 programs operated)•10 pin MIL type connector.•Output cable is not supplied. Connecting cable (optional) 1 m (936937)•Available for LSM-6200 (544-071, 544-072) and LSM-6902H (544-498, 544-499).Note 1: Output is 6 digits of measurement data.Note 2: Displaying 6th and 7th digit after the decimal point is not supported.Digimatic code output unit•Enables second unit connection to LSM-6200 (544-071, 544-072). (both units must be the same model)Note: Cannot be used for LSM-6902H (544-498, 544-499).•Depending on the layout of the two measuring units, large-diameter measurement, XY measurement, and parallel measurement are possible.•Both of the measuring units and display units can be simultaneously operated.120±1047.8200±10Dual connection unit•I/O, analog output.•Simultaneous measurement is supported by two pairs of GO/NG judgment outputs. •Available for LSM-6200 (544-071, 544-072) and LSM-6902H (544-498, 544-499).2nd I/O analog I/FXY•Both BCD (02AGC910) and 2nd I/O analog I/F (02AGC880) can be mounted on LSM-6200 (544-071, 544-072) and LSM-6902H (544-498, 544-499) using this cable. Note: If using this cable, the dual connection unit (02AGP150) cannot be used.Cable for BCD and 2nd I/O simultaneous mountSPECIFICATIONSOrder No.02AGC840SPECIFICATIONSOrder No.02AGP150SPECIFICATIONSOrder No.02AGC880Standard AccessoriesConnector (DDK) 57-30360 (214188)SPECIFICATIONSOrder No.02AGE060Unit: mmDIMENSIONS

元のページ  ../index.html#473