H-21HLinear ScalesDesigned to accurately capture positional coordinates along an axisMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.•Effective length: 12 m, Maximum response speed: 8 m/s, Resolution: 1 nm •Various interfaces are supported.•A new detection method has improved robustness in regards to contamination resistance and gap tolerance (in-house testing result).•There is a choice of mounting method: double-sided tape or double-end screw.•Signal check program enables integrity check and maintenance.Refer to the NC Linear Scale Systems Brochure (No. E13005) for more details.An inspection certicate is supplied as standard. Refer to page U-11 for details.Linear Scales ABS ST1300SERIES 579 SPECIFICATIONSModelABS ST1300Scale typeDouble-end mountingDouble-sided tape mountingMax. effective length500 to 12000 mm10 to 3000 mmResolution0.001 µm/0.01 µm (switched at shipment)Detection methodOptical reflection type linear encoderIndication accuracy (20 ºC)±5 µm (1 m or less), ±5 µm/m (1.1 m or more)Maximum response speed8 m/s or lessExpansion coefficient≈10×10-6/KPower supplyDC5 V ±10 %Maximum current consumption270 mA or 250 mA (depends on interface)Cable length1 m (standard)Maximum cable length29 m (including head cable)Usable temperature (humidity) range0 to 50 °C (RH 20 to 80 %, non-condensing)Mounted to steel: 0 to 50 °C (RH 20 to 80 %, non-condensing)Mounted to another material: 10 to 40 °C (RH 20 to 80 %, non-condensing) Storage temperature (humidity) range–20 to 70 °C (RH 20 to 80 %, non-condensing)Note: For details on specification, mounting procedure, and adjustments, refer to the corresponding brochure and operation manual.Absolute typeSeries nameSeparate Type ABSOLUTE Linear ScaleInterface specification*10:Supports Mitutoyo ENSIS high-speed interface ABS ST130□A4:Supports Mitsubishi Electric Corporation, high-speed serial interface ABS ST134□A5:Supports FANUC CORPORATION, high-speed serial interface ABS ST135□7:Supports Panasonic Corporation, Motor Business Unit high-speed serial interface ABS ST137□A8:Supports YASKAWA Electric Corporation, high-speed serial interface ABS ST138□AABS ST13 4 1 A - 1200 D Effective range: 10 to 12000 mmScale mountD: Double-end mountingE : Double-sided tape mountingTransmission methodA: When 0, 4, 7, or 8 is selected in the interface specification listed on the leftNothing: When 5 is selected in the interface specification listed on the leftResolution1: Resolution 0.01 µm2: Resolution 0.001 µmMeaning of Model No.Double-end screw-mounting versionDouble-sided tape mounting versionAvailable Interfaces*1FANUC CORPORATION, Serial αi InterfaceMitsubishi Electric Corporation, MELSERVO MR-J4/MR-J3 Series YASKAWA Electric Corporation, Σ-VII Series Panasonic Corporation, Motor Business Unit, MINAS SeriesMitutoyo ENSIS*2*1 Be sure to contact each manufacturer for details of the applicable systems (availability of connection).*2 ENSIS is a registered trademark of Mitutoyo Corporation.

元のページ  ../index.html#496