L-12Mitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.• CS-3300 series are highly functional and user-friendly surface roughness and contour measuring systems with innovative design features.• Large sized base models and high-column models are newly added to the line-up.• Equipped with a wide range and high resolution Z1-axis detector.• Often a special method of workholding, such as a custom jig, is required to measure an inclined workpiece surface but this is not needed if you select a model from the CS-3300 series since these have an inclining drive unit to handle this situation. This feature makes approaching the target surface and measurement of a large workpiece much easier.• The new style remote box has been developed in pursuit of operational usability. An overdrive knob controls the drive speed in real time and is very convenient when fine positioning is required. Another new feature is a part program key that strongly supports creation of measurement part programs, including a move command for manual operation and a measurement start command.• High throughput is achieved thanks to high drive speed (X axis: Max. 80 mm/s, Z2 axis: Max. 30 mm/s2).• All connecting cables are contained within the measuring instrument to eliminate any inconvenience during measurement.• Since the Z1-axis detector incorporates an anti-collision safety device, the detector unit will automatically stop if it touches a workpiece or fixture.SPECIFICATIONSModel No.CS-3300S4CS-3300H4CS-3300W4CS-3300L4CS-3300S8CS-3300H8CS-3300W8CS-3300L8Measuring rangeX axis100 mm200 mmZ1 axis 5 mm (±2.5 mm in horizontal situation)Straightness (when the X axis is horizontal)0.2 µm/100 mm0.8 µm/200 mmAccuracy (20 °C)X axis±(0.8+0.01L) µm L = Measurement Length (mm)(0.8+0.015L) µm L = Measurement Length (mm)Z1 axis (detector unit)±(1.2+|2H|/100) µm H = Measurement height from the horizontal position (mm)Detector (Z1 axis)Detection methodDifferential inductanceMeasuring force0.75 mNStylus tipStandardTip radius 2 μm, Tip angle 60°, Diamond (surface roughness/contour)ConeTip radius 25 μm, Tip angle 30°, Sapphire (contour)Stylus up/downAvailable (stoppable at mid-stroke if required)X-axis inclination angle±45°Z2-axis (column) travel range300 mm500 mm700 mm300 mm500 mm700 mmBase size (W×D)600×450 mm1000×450 mm600×450 mm1000×450 mmBase materialGraniteNote: While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon.Inclinable drive unitDetector sliding mechanismConnecting cables are contained within the measuring instrument.CS-3300H8CS-3300H8(With monitor arm)An inspection certicate is supplied as standard. Refer to page U-11 for details.Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).CS-3300 SeriesSERIES 525 — Surface Texture Measuring InstrumentsL

元のページ  ../index.html#543