N-8NMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).High-accuracy Separate Guide TypeMICROCORD FALCIO Apex 2000G/3000G Series• These series are equipped with a system to automatically restore accuracy deterioration (MOVAC) caused by foundation deformation as a standard feature.• Equipped with a temperature compensation system that guarantees the specied accuracy within a wide range of 18 °C to 22 °C under certain environmental conditions, although high-accuracy CMMs should ideally be installed in a temperature controlled room. • Safety devices such as a Z-axis beam sensor, tape switch, and area sensor are available as options.• Ultra-high precision linear encoders (manufactured by Mitutoyo) are used on each axis to provide a higher resolution and accuracy that complements the improved overall performance.• The FALCIO Apex 2000G/3000G series are CNC CMMs that use Mitutoyo's standard structure for large machines which are designed to be used for measuring large and heavy workpieces with high accuracy. The picture below gives a good idea of how large the machine is. The measuring accuracy and drive speed are the world's highest in the X-axis measuring range of 2000 mm and 3000 mm.Model Items FALCIO Apex 203015GFALCIO Apex 204015GFALCIO Apex 205015GFALCIO Apex 305015GMeasuring rangeX axis2000 mm2000 mm2000 mm3000 mmY axis3000 mm4000 mm5000 mm5000 mmZ axis1500 mm1500 mm1500 mm1500 mmNote: While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon.SPECIFICATIONSFALCIO Apex 305015GFALCIO Apex Series AccuracyUnit: μmProbe usedLength measurement error*1ISO 10360-2: 2009SP25ME0, MPE=3.5+4L/1000*2*1 Specifications vary by configuration, size, and thermal environment.*2 L = Measuring length (unit: mm)Refer to the Large Bridge and Gantry CNC Coordinate Measuring Machines Brochure (No. E16009) for more details.

元のページ  ../index.html#577