N-12NMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).Manual Type CMMMICROCORD Crysta-Plus M Series Refer to the Crysta-Plus M Series Brochure (No. E16013) for more details.•Manual oating type CMMs developed in the quest for high-accuracy, low cost and easy operation. •Ultra-high-precision linear encoders (manufactured by Mitutoyo) are used on each axis to provide high performance.•The Crysta-Plus M700 series is equipped with a mobile clamp so that one-touch clamping on each axis can be performed by hand. Continuous ne feed over the entire measuring range can be performed.SPECIFICATIONSModel Items Crysta-Plus M443Crysta-Plus M544Crysta-Plus M574Crysta-Plus M776Crysta-Plus M7106Measuring rangeX axis400 mm500 mm700 mmY axis400 mm400 mm700 mm700 mm1000 mmZ axis300 mm400 mm600 mmAccuracy *1*2E0, MPE3.0+4L/1000 µm3.5+4L/1000 µm4.5+4.5L/1000 µmPFTU, MPE4.0 µm4.0 µm5.0 µm*1 According to ISO 10360-2 methods. L = Measuring length (unit: mm)*2 When using the touch-trigger probe MH20i/MH20/TP20 and stylus (L 10 mm)Note: While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon.•Equipped with a temperature compensation system that guarantees the specied accuracy within a wide range of temperature under certain environmental conditions, although CMMs should ideally be installed in a temperature controlled room. •Available options include the auto-leveling air-spring vibration isolator and the illuminator unit for the probe. Crysta-Plus M7106Crysta-Plus M443Crysta-Plus M574

元のページ  ../index.html#581