C-13CMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.ABSOLUTE BorematicSERIES 568 —ABSOLUTE Digimatic Snap-Open Bore Gages• A snap-type digital display, inside-diameter measuring instrument allows quick and easy measurement with lever operation.• Titanium-coated measuring pins provide excellent durability and impact resistance.• Three-Point contact measuring head enables highly repeatable measurement data to be obtained.• Built-in ABS (absolute) scale with absolute origin eliminates the need for origin setting each time power is turned on. In addition, reliability has improved due to elimination of overspeed errors.• Equipped with GO/NO-GO judgment function, which is enabled when the upper and lower limits are set. In addition, the GO/NO-GO judgment result can be zoomed.• Dual HOLD function buttons, optimally located, enable high operability.• 330° rotatable display unit for easy reading at any angle.• Measurement can be made close to the bottom of a blind hole. • Deep holes can be measured by attaching an Extension Rod (optional).• Digimatic output port enables inclusion in a statistical process control or networked measurement system. (Refer to page A-3 for details)• Interface Input Tools are available that enable the conversion of measurement data to keyboard signals that are then directly input to cells in off-the-shelf spreadsheet software such as Excel. (Refer to page A-25 for details) • Interchangeable-Head Sets (interchangeable measuring heads type) covering an extended measuring range using multiple heads and Non-interchangeable-Head Sets are available.• For details of Setting Rings, refer to page C-47.Extension Rod (optional)L3L4L5HoltestFor easy and accurate measurement of inside diametersRange(mm)L3(mm)L4(mm)L5(mm)6 - 122 or below—2.512 - 200.3 or below5.63.520 - 308.35.230 - 5013.010.050 - 12517.014.0An inspection certicate is supplied as standard. Refer to page U-9 for details.Technical Data• Resolution: 0.001 mm or 0.00005 in/0.001 mm• Response speed: Innite• Battery: SR44 (1 pc.), 938882, for initial operational checks (standard accessory) • Scale type: Electrostatic capacitance type absolute encoder• Battery life: Approx. 5,000 hours in continuous useFunctionsGO/NO-GO judgmentGO/NO-GO judgment zoom 2-Point PresetZero-settingData hold, Error alarm Low battery voltage alert Data outputFunction Lock330° rotary display ON/OFF functioninch/mm conversion (inch/mm models)For details of Special-order Products, refer to page C-49. Optional AccessoriesRefer to page A-21 for details• USB Input Tool Direct (2 m): 06AFM380F• Connecting cables for U-WAVE-TFor standard (160 mm): 02AZD790F For foot switch: 02AZE140F568-368568-364Actual size11 mmCharacter height of 11 mm (1.5 times the character area of conventional 8.5 mm products).• Large LCD• Function LockEnsures reliability of measurement by locking the settings to prevent preset function settings from being changed by mistake.The three large-button design employed by ID-N/ID-B, the ABSOLUTE coolant proof Digimatic indicators, enables easier and simpler operation.• Three large buttonsPower ON/OFFParameter setup modeTolerance judgment settingFunction lock setting• Preset (ABS measurement system) • Zero-setting (INC measurement system)• Switches between the ABS (absolute) and INC (incremental) measurement modesProducts equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).
元のページ ../index.html#182