C-27CMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Bore GagesSERIES 526 — for Extra Small Holes• The indicator (dial indicator, Digimatic indicator) and dial protection cover are optional. Select an indicator from the recommended dial indicators and Digimatic indicators. Please contact us for advice when using an indicator other than the recommended indicators.• An optional stand (215-120-10) is available for efcient measurement of multiple small holes. (Refer to page C-30 for details)Bore GagesFor easy and accurate measurement of inside diametersInchOrder No.Range (in)Accuracy (in) Repeatability (in)Bore gageDial indicatorDial protection cover Setting ring526-175-100.037 - 0.0610.000160.00004526-175-10Not suppliedNot suppliedNot supplied526-165-100.059 - 0.1560.00016526-165-10526-155-100.146 - 0.2870.00024526-155-10526-176-200.037 - 0.0610.00016526-175-102923AB-10(Graduation: 0.0001 in)21DZA000526-166-200.059 - 0.1560.00016526-165-10526-156-200.146 - 0.2870.00024526-155-10526-175-110.037 - 0.0610.00016526-175-10Not suppliedNot suppliedSupplied526-165-110.059 - 0.1560.00016526-165-10526-155-110.146 - 0.2870.00024526-155-10526-176-210.037 - 0.0610.00016526-175-102923AB-10(Graduation: 0.0001 in)21DZA000526-166-210.059 - 0.1560.00016526-165-10526-156-210.146 - 0.2870.00024526-155-10526-170-11Note: The dial indicator and the protection cover are optional.• These gages are designed to measure the diameters of very small holes. SPECIFICATIONSMetricOrder No.Range (mm)Accuracy (μm)Repeatability (μm)Bore gageDial indicatorDial protection cover Setting ring526-170-100.95 - 1.5541526-170-10Not suppliedNot suppliedNot supplied526-160-101.50 - 3.954526-160-10526-150-103.70 - 7.306526-150-10526-172-200.95 - 1.554526-170-102109AB-10(Graduation: 0.001 mm)21DZA000526-162-201.50 - 3.954526-160-10526-152-203.70 - 7.306526-150-10526-173-200.95 - 1.554526-170-102046AB(Graduation: 0.01 mm)21DZA000526-163-201.50 - 3.954526-160-10526-153-203.70 - 7.306526-150-10526-170-110.95 - 1.554526-170-10Not suppliedNot suppliedSupplied526-160-111.50 - 3.954526-160-10526-150-113.70 - 7.306526-150-10526-172-210.95 - 1.554526-170-102109AB-10(Graduation: 0.001 mm)21DZA000526-162-211.50 - 3.954526-160-10526-152-213.70 - 7.306526-150-10526-173-210.95 - 1.554526-170-102046AB(Graduation: 0.01 mm)21DZA000526-163-211.50 - 3.954526-160-10526-153-213.70 - 7.306526-150-10Note: Setting rings are not supplied with some models. Please purchase them separately if necessary. For details of setting rings, refer to page C-47.Pin point1/2·LL1/2·LContact PointMeasurement PrincipleSetting Rings (Metric models)Nominal size • Order No. 526-170-11 etc. 177-220: 1.0 mm 177-222: 1.1 mm 177-225: 1.2 mm 177-227: 1.3 mm 177-230: 1.4 mm• Order No. 526-160-11 etc. 177-236: 1.75 mm 177-239: 2.00 mm 177-242: 2.25 mm 177-208: 2.50 mm 177-246: 2.75 mm 177-248: 3.00 mm 177-250: 3.25 mm 177-252: 3.50 mm 177-255: 3.75 mm• Order No. 526-150-11 etc. 177-204: 4.0 mm 177-257: 4.5 mm 177-205: 5.0 mm 177-263: 5.5 mm 177-267: 6.0 mm 177-271: 6.5 mm 177-275: 7.0 mm Setting Rings (Inch models)Nominal size • Order No. 526-175-11 etc. 177-350: 0.040 in 177-351: 0.045 in 177-352: 0.050 in 177-353: 0.055 in 177-354: 0.060 in• Order No. 526-165-11 etc. 177-355: 0.07 in 177-356: 0.08 in 177-357: 0.09 in 177-358: 0.10 in 177-359: 0.11 in 177-360: 0.12 in 177-361: 0.13 in 177-362: 0.14 in 177-363: 0.15 in• Order No. 526-155-11 etc. 177-364: 0.16 in 177-365: 0.18 in 177-366: 0.20 in 177-367: 0.22 in 177-368: 0.24 in 177-369: 0.26 in 177-370: 0.28 in
元のページ ../index.html#196