C-31CMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Bore GagesSERIES 511 — for Small Holes• These gages are designed to measure the diameters of very small holes.• The indicator (dial indicator, Digimatic indicator) and dial protection cover are optional. Select an indicator from the recommended dial indicators and Digimatic indicators. Please contact us for advice when using an indicator other than the recommended indicators.• Setting Rings are available to aid in accurately setting a gage before making a measurement. (For details, refer to page C-47)Bore GagesFor easy and accurate measurement of inside diametersContact Points6 - 10 mm10 - 18.5 mmTechnical Data• Accuracy:Metric models: 5 μmInch models: 0.0002 in• Repeatability:Metric models: 2 μmInch models: 0.00008 in• Adjacent error:Metric models: 2 μmInch models: 0.00008 inOptional Accessories• Dial indicator (See Chapter F)• Dial protection cover: 21DZA000 (See page C-45)Recommended Digimatic Indicators (see Chapter F)• Metric models:2046AB (0.01 mm)2972AB (0.01 mm - One-revolution type)2109AB-10 (0.001 mm)2900AB-10 (0.001 mm - One-revolution type)• Inch models:2922AB (0.0005 in)2977AB (0.0005 in - One-revolution type)2923AB-10 (0.0001 in)2910AB-10 (0.0001 in - One-revolution type)Recommended Digimatic Indicators (see Chapter F)• Metric models:543-310B (ID-C112GXB: 0.001 mm)• Inch models:543-312B (ID-C112GEXB: 0.001 mm/0.00005 in)Note: Indicators equipped with rubber bellows, such as water-proof types, cannot be used.SPECIFICATIONSMetricOrder No.Range (mm)Stroke of contact point (mm)Measuring force (N)Guide force (N)Content of setProbing depth (mm)Bore gageDial indicatorDial protection coverAnvilInterchangeable Washer511-2096 - 100.52 or less—511-209Not suppliedNot supplied9 pcs.Not supplied50511-20110 - 18.50.66 or less511-2011 pc.100511-210-206 - 100.52 or less—511-2092109AB-10(Graduation: 0.001 mm)21DZA0009 pcs.Not supplied50511-203-2010 - 18.50.66 or less511-2011 pc.100511-211-206 - 100.52 or less—511-2092046AB(Graduation: 0.01 mm)21DZA0009 pcs.Not supplied50511-204-2010 - 18.50.66 or less511-2011 pc.100InchOrder No.Range (in)Stroke of contact point (in)Measuring force (N)Guide force (N)Content of setProbing depth (in)Bore gageDial indicatorDial protection coverAnvilInterchangeable Washer511-2140.24 - 0.40.0202 or less—511-214Not suppliedNot supplied9 pcs.Not supplied2511-2050.4 - 0.740.0246 or less511-2051 pc.4511-212-200.24 - 0.40.0202 or less—511-2142923AB-10(Graduation: 0.0001 in)21DZA0009 pcs.Not supplied2511-206-200.4 - 0.740.0246 or less511-2051 pc.4511-213-200.24 - 0.40.0202 or less—511-2142922AB(Graduation: 0.0005 in)21DZA0009 pcs.Not supplied2511-207-200.4 - 0.740.0246 or less511-2051 pc.4511-201Note: The dial indicator and protection cover are optional.

元のページ  ../index.html#200