C-38CMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.AnvilInterchangeable washerAnvilInterchangeable washerSub-anvil (Supplied only for 511-763 and 511-783.)No.511-761 CGB-35X0.5120562320562421DZA213J21DZA213H21DZA213G21DZA213F21DZA213E21DZA213D21DZA213C21DZA213B18.534916.532814.530721DZA213A6.54.52.5223220181L(mm)8.524410.526512.5286tø5ø7.4SR1.5Carbide ballM5×0.5(L1)L143102178tø9.5ø6.2M11×1M11×15056.5SR2.5Carbide ballø5.9(L1)L149.5102178tø9.5ø6.2M11×1M11×15056.5SR2.5Carbide ballø5.9(L1)L149.5102178tø9.5ø6.2M11×1M11×15056.5SR2.5Carbide ballø5.9(L1)L149.5Spanner102148747Thickness: 1.5No.511-761 CGB-35X0.5120562320562421DZA213J21DZA213H21DZA213G21DZA213F21DZA213E21DZA213D21DZA213C21DZA213B18.534916.532814.530721DZA213A6.54.52.5223220181L(mm)8.524410.526512.5286tø5ø7.4SR1.5Carbide ballM5×0.5(L1)L143DIMENSIONSUnit: mmDIMENSIONSUnit: mmRecommended Digimatic Indicators (see Chapter F)• Metric models:543-310B (ID-C112GXB: 0.001 mm)• Inch models:543-312B (ID-C112GEXB: 0.001 mm/0.00005 in)STANDARD ACCESSORIESBore gage(Main body)AnvilInterchangeable washerSpannerMarked No.Order No.Indication of measuring sizeL1L14Order No.tOrder No.511-761511-7811 21DZA213A18 mm/0.71 in 5.5 mm/0.22 in2.5 mm/0.10 in 2056232056240.5 mm/0.02 in1.0 mm/0.04 in1021482 21DZA213B20 mm/0.79 in7.5 mm/0.30 in4.5 mm/0.18 in 3 21DZA213C22 mm/0.87 in 9.5 mm/0.37 in6.5 mm/0.26 in 4 21DZA213D24 mm/0.94 in 11.5 mm/0.45 in8.5 mm/0.33 in 5 21DZA213E26 mm/1.02 in 13.5 mm/0.53 in10.5 mm/0.41 in 6 21DZA213F28 mm/1.10 in 15.5 mm/0.61 in12.5 mm/0.49 in 7 21DZA213G30 mm/1.18 in 17.5 mm/0.69 in14.5 mm/0.57 in8 21DZA213H32 mm/1.26 in 19.5 mm/0.77 in16.5 mm/0.65 in 9 21DZA213J34 mm/1.34 in 21.5 mm/0.85 in18.5 mm/0.73 in STANDARD ACCESSORIESBore gage(Main body)AnvilInterchangeable washerSub-AnvilMarked No.Order No.Indication of measuring sizeL1L14Order No.tOrder No.511-762511-7821 21DZA232A35 mm/1.38 in 155.52054572054582054592054600.5 mm/0.02 in1.0 mm/0.04 in2.0 mm/0.08 in3.0 mm/0.12 in2 21DZA232B40 mm/1.57 in 2010.53 21DZA232C45 mm/1.77 in 2515.54 21DZA232D50 mm/1.97 in 3020.55 21DZA232E55 mm/2.17 in 3525.56 21DZA232F60 mm/2.36 in 4030.5511-763511-783( ) Using 50 mm/2 inSub-Anvil1 21DZA232A50 mm (100 mm)/1.97 in (3.94 in)155.5102178(50 mm/2 in)2 21DZA232B55 mm (105 mm)/2.17 in (4.13 in)2010.53 21DZA232C60 mm (110 mm)/2.36 in (4.33 in)2515.54 21DZA232D65 mm (115 mm)/2.55 in (4.53 in)3020.55 21DZA232E70 mm (120 mm)/2.74 in (4.72 in)3525.56 21DZA232F75 mm (125 mm)/2.93 in (4.92 in)4030.57 21DZA232G80 mm (130 mm)/3.12 in (5.12 in)4535.58 21DZA232H85 mm (135 mm)/3.31 in (5.31 in)5040.59 21DZA232J90 mm (140 mm)/3.50 in (5.51 in)5545.510 21DZA232L95 mm (145 mm)/3.69 in (5.71 in)6050.511 21DZA232M100 mm (150 mm)/3.88 in (5.91 in)6555.5511-764511-7841 21DZA232A100 mm/3.94 in 155.52 21DZA232B105 mm/4.13 in 2010.53 21DZA232C110 mm/4.33 in 2515.54 21DZA232D115 mm/4.53 in 3020.55 21DZA232E120 mm/4.72 in3525.56 21DZA232F125 mm/4.92 in4030.57 21DZA232G130 mm/5.12 in4535.58 21DZA232H135 mm/5.31 in5040.59 21DZA232J140 mm/5.51 in5545.510 21DZA232L145 mm/5.71 in6050.511 21DZA232M150 mm/5.91 in6555.512 21DZA232N155 mm/6.10 in7060.513 21DZA232P160 mm/6.30 in7565.5Contact Points18 - 35 mm/0.7 - 1.4 inRound guide35 - 60 mm/1.4 - 2.5 inRound guide50 - 150 mm/2.0 - 6.0 in100 - 160 mm/4.0 - 6.5 inNote: It is not permissible to use a sub-anvil other than as supplied as a standard accessory, or widen a measuring range by using multiple sub-anvils. (The measurement accuracy in such cases is not guaranteed.)Roller guidesRoller guidesContact pointAnvilSR0.75 Carbide ballInch: 23Inch: ø9.53ø9Approx. 80Metric: ø8Metric: 32123506.411.94.3 ø12.718 - 35 mm/0.7 - 1.4 inContact pointSR0.75Carbide ballAnvilInch: 23Inch: ø9.53Contact pointSR1.0 Carbide ballAnvilø12ø12.8L16Approx. 8012350Metric: ø8Metric: 32928.912L1718.29ø20RangeL16L1750 - 150 mm/2 - 6 in3816.5100 - 160 mm/4 - 6.5 in5066.535 - 60 mm/1.4 - 2.5 in50 - 150 mm/2 - 6 in100 - 160 mm/4 - 6.5 in• The ID measurement can be performed easily since the minimum value is detected automatically.• Up to three combinations of master value and tolerance value can be set.• Nine measurement results (maximum) can be saved and recalled from memory (when no external device is connected).Refer to page F-14 for details. Unit: mmUnit: mm

元のページ  ../index.html#207