D-4DMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.IP67 protection levelSecond characteristic number Protection from liquids (water, etc.) Brief descriptionDescription7Protected against water penetration.Ingress of water in quantities causing harmful effects shall not be possible when the enclosure is temporarily immersed in water under standardized conditions of pressure and time.First characteristic number Protection from solid objects (people or things) Brief description Description6Dust-proofNo ingress of dust allowed.Note: For details of the test conditions used in evaluating each degree of protection, please refer to the original standard. 6 7FunctionsOrigin-set: Absolute origin position can be changed.Data output*: Measurement data output connector allows integration into statistical process control and measurement systems. * Excludes 500-702-20 and 500-703-20.Automatic power on/off: LCD display will turn off after 20 minutes inactivity, but the ABS scale unit origin is stored. Power is restored when the slider is moved. Alarm: Error message is displayed if error in calculation is found and measurement is stopped. Measurement will not be continued while error is displayed. Also, if the battery voltage becomes low, “B” appears to alert the user before measurement is no longer possible. Inch/MetricOrder No.Range (in)Maximum permissible error*Measurement data output portMass (g)Thumb rollerRemarksEMPESMPE500-731-200 - 6±0.001 in/ ±0.02 mm±0.002 in/ ±0.04 mm—168Carbide-tipped jaws for outside measurement500-732-200 - 8198500-733-200 - 6168Carbide-tipped jaws for outside and inside measurement500-734-200 - 8198500-735-200 - 6168Carbide-tipped jaws for outside measurement500-736-200 - 8198500-737-200 - 6168Carbide-tipped jaws for outside and inside measurement500-738-200 - 8198500-752-200 - 6—168—500-753-200 - 8198500-762-200 - 6168500-763-200 - 8198500-768-200 - 6—168Depth bar ø1.9 mm500-769-200 - 6168Depth bar ø1.9 mm500-764-200 - 12±0.0015 in/±0.03 mm±0.0025 in/ ±0.05 mm350—500-754-20—350* Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.SPECIFICATIONSMetricOrder No.Range (mm)Maximum permissible error (mm)*Measurement data output portMass (g)Thumb rollerRemarksEMPESMPE500-702-200 - 150±0.02±0.04—168—500-703-200 - 200198500-706-200 - 150168—500-707-200 - 200198500-716-200 - 150168500-717-200 - 200198500-712-200 - 150168500-713-200 - 200198500-719-200 - 150168Depth bar ø1.9 mm500-721-200 - 150168Carbide-tipped jaws for outside measurement500-722-200 - 200198500-723-200 - 150168Carbide-tipped jaws for outside and inside measurement500-724-200 - 200198500-714-200 - 300±0.03±0.05350—500-718-20345—500-704-20—350500-708-20345—* Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.DIMENSIONSHCDBALRange (mm)ABCDHL0 - 15016.52114.640162330 - 2002024.518.1502900 - 3002227.519.86420404Outside jaw thickness = 3.5 mm for 0 to 150 mm/0 to 200 mm models 3.8 mm for 0 to 300 mm modelUnit: mm
元のページ ../index.html#223