MEASURING INSTRUMENTS CATALOG No.E2021
230/604

D-11DMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.CalipersAn industry standard measuring tool• Fine-adjustment aids slider positioning.• Allows step measurement.Vernier CaliperSERIES 532 — with ne adjustment• The slider moves only when the spring-loaded thumb grip is depressed.• Allows step measurement.Vernier CaliperSERIES 531 — with thumb gripAEEGHDDCAFBBFL532-101Fine adjustment wheelSPECIFICATIONSMetricOrder No.Range(mm)Maximum permissible error (mm)*1• EMPE (outside measurement)• SMPE (inside measurement)Depth barRemarks532-101*20 - 130±0.03Bladewith ne adjustment532-102*20 - 180±0.03532-103*20 - 280±0.04*1 Partial Measuring Face Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in JIS B 7507: 2016, revised based on ISO 13385-1: 2011. The measurement method is the same as before. Refer to page D-39 for details. *2 Graduation: 0.02 mmMetric/Inch with metric/inch double scale Order No.Range (mm)Maximum permissible error (in)*1• EMPE (outside measurement)• SMPE (inside measurement)Depth barGraduation Remarks532-1190 - 130±0.03Blade0.02 mm (0.001 in)with ne adjustment532-1200 - 180±0.03532-1210 - 280±0.04DIMENSIONS Unit: mmRangeABDEFHL0 - 130 mm/0 - 5 in1721.54053.531.2162290 - 180 mm/0 - 7 in20.5255053.531.2162880 - 280 mm/0 - 11 in2227.56466.53820404Jaw thickness: 3 mm for 0 to 130 mm/0 to 5 inch and 0 to 180 mm/0 to 7 inch models 3.8 mm for 0 to 280 mm/0 to 11 inch modelSPECIFICATIONSMetricOrder No.Range (mm)Maximum permissible error (mm)*1• EMPE (outside measurement)• SMPE (inside measurement)Depth barRemarks531-101*20 - 150±0.05Blade—531-102*20 - 200531-103*20 - 300±0.08*1 Partial Measuring Face Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in JIS B 7507: 2016, revised based on ISO 13385-1: 2011. The measurement method is the same as before. Refer to page D-39 for details. *2 Graduation: 0.05 mmMetric/Inch with metric/inch double scaleOrder No.Range (mm)Maximum permissible error (in)*1• EMPE (outside measurement)• SMPE (inside measurement)Depth barGraduationRemarks531-1220 - 150±0.05Blade0.05 mm (1/128 in) with inch/mm conversion label531-128±0.030.02 mm (0.001 in) High accuracy model531-1080 - 200±0.050.05 mm (1/128 in)—531-129±0.030.02 mm (0.001 in)High accuracy model531-1090 - 300±0.080.05 mm (1/128 in)—531-112±0.040.02 mm (0.001 in)High accuracy model HL53.5 (66.5)* 30 (36)*DBA* ( ): Dimension in 0 to 300 mm/0 to 12 inch modelDIMENSIONS Unit: mmRangeABDHL0 - 150 mm/0 - 6 in1721.540162290 - 200 mm/0 - 8 in20.52550162880 - 300 mm/0 - 12 in2227.56420404Jaw thickness: 3 mm for 0 to 150 mm/0 to 6 inch and 0 to 200 mm/0 to 8 inch models 3.8 mm for 0 to 300 mm/0 to 12 inch model 531-101Spring loaded thumb grip

元のページ  ../index.html#230

このブックを見る