D-15DMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.CalipersAn industry standard measuring tool• IP66 Absolute Digital Caliper (Refer to page D-6 for details on the Absolute function.)• Lightweight Digimatic Calipers that employ CFRP (Carbon Fiber Reinforced Plastics) in the beam.• Allows integration into statistical process control and measurement systems for models with measurement data output connector. (Refer to page A-3.)ABSOLUTE Coolant Proof Carbon Fiber CaliperSERIES 552 — with Standard jawstRAEFDBHCLHENUDJUSGBuilt-in constant-force mechanism552-303-10SPECIFICATIONSMetricOrder No.Range (mm)*1Maximum permissible error (mm)*2EMPESMPE552-302-100 - 450 (20.1 - 470)±0.04±0.04552-303-100 - 600 (20.1 - 620)±0.04±0.04552-304-100 - 1000 (20.1 - 1020)±0.05±0.05552-305-100 - 1500 (20.1 - 1520)±0.09±0.09552-306-100 - 2000 (20.1 - 2020)±0.12±0.12*1 ( ): Dimension in inside measurement*2 Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.Note: A constant-force mechanism is used in the nger rest; however, this is only an auxiliary mechanism to avoid measurement error caused by excessive measuring force. To measure with good accuracy, use the minimum necessary measuring force for the caliper measuring faces to make sufcient contact with the workpiece. Refer to page D-39 for details.Inch/MetricOrder No.Range (in)*1Maximum permissible error (in)*2EMPESMPE552-312-100 - 18 (0.504 - 18.5)±0.002±0.002552-313-100 - 24 (0.504 - 24.5)±0.002±0.002552-314-100 - 40 (1.004 - 40.5)±0.002±0.002552-315-100 - 60 (1.004 - 60.5)±0.004±0.004552-316-100 - 80 (1.004 - 80.5)±0.005±0.005DIMENSIONS Unit: mmRangeDEGHJLNRStU0 - 450 mm10091.835256564041.2R1018810(0 - 18 in)(0.25 in)0 - 600 mm10091.835256579041.2R1018810(0 - 24 in)(0.25 in)0 - 1000 mm150113.84532100123062.8R1024810(0 - 40 in)(0.5 in)0 - 1500 mm150113.84532100174062.8R1024810(0 - 60 in)(0.5 in)0 - 2000 mm150113.84532100225062.8R1024810(0 - 80 in)(0.5 in)Technical Data• Resolution: 0.01 mm or 0.0005 in/0.01 mm• Material of jaws: Stainless Steel Hardened• Display:LCD• Scale type:ABSOLUTE electromagnetic induction linear encoder• Max. response speed: Unlimited• Battery:SR44 (1 pc.), 938882, for initial operational checks (standard accessory)• Battery life:Approx. 5,000 hours in continuous use• Dust/Water protection level: IP66 (IEC60529)*• Standard accessory: Jaw clamps (2 pcs.), 05GZA033 * Rustproong shall be applied after use if caliper was in contact with coolant. Functions • Zero-setting• Data hold• Offsetting• Presetting• Data output• Low-power and low-voltage alert• Counting value composition error• Automatic power on/off, inch/mm reading (inch/mm models)Note: LCD display turns off after 20 minutes inactivity but the ABS scale unit origin is stored. Moving the slider restores the display.Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).
元のページ ../index.html#234