D-19DMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.CalipersAn industry standard measuring tool• IP66 Absolute Digital Caliper (Refer to page D-6 for a description of Absolute measurement.)• The range of applications can be expanded by using interchangeable jaws (optional). • Allows integration into statistical process control and measurement systems for models with measurement data output connector. (Refer to page A-3.)• The PRESET function enables quick and easy scale resetting to match the jaws when they are changed.ABSOLUTE Coolant Proof Carbon Fiber CaliperSERIES 552 - with Interchangeable Jaws552-182-10 with optional interchangeable jaws552-182-10SPECIFICATIONSMetricOrder No.Range (mm)Maximum permissible error (mm)*EMPESMPE552-181-100 - 450±0.04552-182-100 - 600552-183-100 - 1000±0.05552-184-100 - 1500±0.09552-185-100 - 2000±0.12* Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.Note1: The Maximum permissible error (MPE) values described above were measured using a dedicated outside measurement inspection tool.Note2: A constant-force mechanism is used in the nger rest; however, this is only an auxiliary mechanism to avoid measurement error caused by excessive measuring force. To measure with good accuracy, use the minimum necessary measuring force for the caliper measuring faces to make sufcient contact with the workpiece. Refer to page D-39 for details. Inch/MetricOrder No.Range (in)Maximum permissible error (in)*EMPESMPE552-191-100 - 18±0.002552-192-100 - 24552-193-100 - 40552-194-100 - 60±0.004552-195-100 - 80±0.005Standard Accessories (2 pcs.)Jaw clamps: 05GZA033Technical Data• Resolution:0.01 mm or 0.0005 in/0.01 mm• Display:LCD• Scale type:ABSOLUTE electromagnetic induction linear encoder• Max. response speed: Unlimited• Battery: SR44 (1 pc.), 938882, for initial operational checks (standard accessory)• Battery life:Approx. 5,000 hours in continuous use• Dust/Water protection level: IP66 (IEC 60529)*• Standard accessory: Jaw clamps (2 pcs.), 05GZA033 * Rustproong shall be applied after use if caliper was in contact with coolant.Functions • Zero-setting• Data hold• Offsetting• Presetting• Data output• Low-power and low-voltage alert• Counting value composition error• Automatic power on/off, inch/mm reading (inch/mm models)Optional AccessoriesFor details, refer to page A-21.• Connecting cables for IT/DP/MUX 05CZA624: SPC cable with data button (1 m) 05CZA625: SPC cable with data button (2 m)• USB Input Tool Direct 06AFM380A: SPC cable for USB-ITN-A (2 m)• Connecting cables for U-WAVE-T 02AZD790A: SPC cable with data button (160 mm)02AZE140A: SPC cable for foot switchProducts equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).
元のページ ../index.html#238