D-20DMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice. Optional accessoriesInterchangeable jaws Surface plate type + Standard typePoint typeSurface plate type + Centerline typeSurface plate type + Scriber for height gagesScriber typeTypical applicationsSPECIFICATIONS89810.50.53298033（47）10昔端部裳肴R4.5Scriber for height gagesOrder No.07GZA000Surface plate typeStandard type (right)Point type Surface plate typeCenterline type Scriber (arc) Scriber type (right) Scriber type (left) Scriber for height gages Surface plate type 60bøa94.5 b a 0.5 9 Centerline TypeOrder No.Componentsab07CZA05707CZA039×2 pcs.30 mm30 mm07CZA06007CZA047×2 pcs.1.2 in1.2 inStandard TypeOrder No.Componentsab07CZA056Right (07CAA044),Left (07CAA045)28 mm(1.1 in)36 mm(1.2 in)Note: 1 setSurface Plate TypeOrder No.ab07CZA04490 mm (3.5 in)28 mm (1.1 in)Scriber TypeOrder No.Componentsab07CZA055Right (07CZA042),Left (07CZA043)8 mm30 mm07CZA061Right (07CZA042),Left (07CZA049)0.31 in1.2 inPoint TypeOrder No.Componentsab07CZA05807CZA041×2 pcs.25 mm50 mm07CZA05907CZA048×2 pcs.1 in2 inStandard typeb a 9 Surface Plate TypePoint typeScriber Typebø1øa309Centerline TypeScriber for height gagesUnit: mmTypeApplicable calipersRangeMaximum permissible error*EMPESMPEStandard type552-181-10 (552-191-10)0 - 450 mm (0 - 18 in)±0.06 mm (±0.0025 in)552-182-10 (552-192-10)0 - 600 mm (0 - 24 in)552-183-10 (552-193-10)0 - 1000 mm (0 - 40 in)±0.07 mm (±0.0030 in)552-184-10 (552-194-10)0 - 1500 mm (0 - 60 in)±0.11 mm(±0.0045 in)552-185-10 (552-195-10) 0 - 2000 mm (0 - 80 in)±0.14 mm (±0.0055 in)Point type552-181-10 (552-191-10)Inside: 50.1 - 500 mm (2.004 - 20 in)—±0.09 mm (±0.0035 in)Outside: 0 - 450 mm (0 - 18 in)±0.09 mm (±0.0035 in)—552-182-10 (552-192-10)Inside: 50.1 - 650 mm (2.004 - 26 in)—±0.09 mm (±0.0035 in)Outside: 0 - 600 mm (0 - 24 in)±0.09 mm (±0.0035 in)—552-183-10 (552-193-10)Inside: 50.1 - 1050 mm (2.004 - 42 in)—±0.10 mm (±0.0040 in)Outside: 0 - 1000 mm (0 - 40 in)±0.10 mm (±0.0040 in)—552-184-10 (552-194-10)Inside: 50.1 - 1550 mm (2.004 - 62 in)—±0.14 mm (±0.0055 in)Outside: 0 - 1500 mm (0 - 60 in)±0.14 mm (±0.0055 in)—552-185-10 (552-195-10)Inside: 50.1 - 2050 mm (2.004 - 82 in)—±0.17 mm (±0.0070 in)Outside: 0 - 2000 mm (0 - 80 in)±0.17 mm (±0.0070 in)—Centerline type 552-181-10 (552-191-10)30.1 - 480 mm (1.204 - 19.2 in)±0.08 mm (±0.0030 in)552-182-10 (552-192-10)30.1 - 630 mm (1.204 - 25.2 in)552-183-10 (552-193-10)30.1 - 1030 mm (1.204 - 41.2 in)±0.10 mm (±0.0040 in)552-184-10 (552-194-10)30.1 - 1530 mm (1.204 - 61.2 in)±0.13 mm (±0.0055 in)552-185-10 (552-195-10)30.1 - 2030 mm (1.204 - 81.2 in)±0.16 mm (±0.0065 in)Scriber type 552-181-10 (552-191-10)30.1 - 480 mm (1.204 - 19.2 in)±0.11 mm (±0.0045 in)552-182-10 (552-192-10)30.1 - 630 mm (1.204 - 25.2 in)552-183-10 (552-193-10)30.1 - 1030 mm (1.204 - 41.2 in)552-184-10 (552-194-10)30.1 - 1530 mm (1.204 - 61.2 in)±0.15 mm (±0.0060 in)552-185-10 (552-195-10)30.1 - 2030 mm (1.204 - 81.2 in)±0.18 mm (±0.0070 in)Surface plate type+Scriber type for height gages 552-181-10 (552-191-10) 0 - 450 mm (0 - 17.7 in)±0.10 mm(±0.0040 in)552-182-10 (552-192-10)0 - 600 mm (0 - 23.7 in)552-183-10 (552-193-10) 0 - 1000 mm (0 - 39.4 in)±0.11 mm (±0.0045 in)552-184-10 (552-194-10)0 - 1500 mm (0 - 59.4 in)±0.15 mm (±0.0060 in)552-185-10 (552-195-10)0 - 2000 mm (0 - 79.6 in)±0.18 mm (±0.0070 in)Surface plate type +Point type 552-181-10 (552-191-10)Outside: 0 - 450 mm (1 - 18 in)±0.12 mm (±0.0050 in)—552-182-10 (552-192-10)Outside: 0 - 600 mm (1 - 24 in)±0.12 mm (±0.0050 in)—552-183-10 (552-193-10)Outside: 0 - 1000 mm (1 - 40 in)±0.13 mm (±0.0055 in)—552-184-10 (552-194-10)Outside: 0 - 1500 mm (1 - 60 in)±0.17 mm (±0.0070 in)—552-185-10 (552-195-10)Outside: 0 - 2000 mm (1 - 80 in)±0.20 mm (±0.0080 in)—Surface plate type+Centerline type 552-181-10 (552-191-10)15.1 - 465 mm (0.6 - 18.6 in)±0.11 mm (±0.0045 in)552-182-10 (552-192-10)15.1 - 615 mm (0.6 - 24.6 in)552-183-10 (552-193-10)15.1 - 1015 mm (0.6 - 40.6 in)±0.12 mm (±0.0050 in)552-184-10 (552-194-10)15.1 - 1515 mm (0.6 - 60.6 in)±0.16 mm (±0.0065 in)552-185-10 (552-195-10)15.1 - 2015 mm (0.6 - 80.6 in)±0.19 mm (±0.0075 in)( ): Inch/Metric models* Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.Note: The values described in the above table are MPE values when attached to a caliper.2550ø1ø55354.5(17)89The above combinations are examples only. Contact us for advice on accuracy when using a contact point in a combination other than as shown above.Note: Note that the error arising from the combination of surface plates is outside the scope of accuracy guarantee.
元のページ ../index.html#239