D-21DMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.CalipersAn industry standard measuring toolVernier CaliperSERIES 160 — with Nib Style Jaws and Fine AdjustmentFine adjustment wheel160-131160-101SPECIFICATIONSMetric with inside measurement vernier scaleOrder No.Range (mm)*1Minimum reading (mm)Maximum permissible error (mm)*2RemarksEMPESMPE160-1300 (20.1) - 4500.05±0.10±0.10without ne adjustment160-1310 (20.1) - 600±0.10±0.10160-1320 (20.1) - 1000±0.15±0.15*1 ( ): Minimum dimension in ID measurement*2 Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.Metric/Inch with metric/inch double scaleOrder No.Range (mm)*1Minimum readingMaximum permissible error (mm)*2RemarksEMPESMPE160-1500 (10.1) - 3000.02 mm/ 0.001 in±0.04±0.04+10 mm/0.394 in to reading in inside measurement160-1510 (20.1) - 450±0.05±0.05+20 mm/0.787 in to reading in inside measurement160-1530 (20.1) - 600±0.05±0.05160-1550 (20.1) - 1000±0.07±0.07*1 ( ): Minimum dimension in ID measurement*2 Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.Inch with inside measurement vernier scaleOrder No.Range (in)*1Minimum reading (in)Maximum permissible error (in)*2RemarksEMPESMPE160-1240 (0.304) - 120.001±0.0015±0.0015—160-1160 (0.504) - 18±0.002±0.002160-1020 (0.504) - 24±0.002±0.002160-1050 (1.004) - 40±0.003±0.003*1 ( ): Minimum dimension in ID measurement*2 Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.Inch/Metric with inch/metric double scaleOrder No.Range (in)*1Minimum readingMaximum permissible error (in)*2RemarksEMPESMPE160-1250 (0.304) - 120.001 in/ 0.02 mm±0.0015±0.0015+0.3 in/7.62 mm to reading in inside measurement160-1190 (0.504) - 18±0.002±0.002+0.5 in/12.7 mm to reading in inside measurement160-1030 (0.504) - 24±0.002±0.002160-1060 (1.004) - 40±0.003±0.003+1 in/25.4 mm to reading in inside measurement*1 ( ): Minimum dimension in ID measurement*2 Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.Metric with inside measurement vernier scaleOrder No.Range (mm)*1Minimum reading (mm)Maximum permissible error (mm)*2RemarksEMPESMPE160-1270 (10.1) - 3000.02±0.04±0.04with ne adjustment160-1280 (20.1) - 450±0.05±0.05160-1010 (20.1) - 600±0.05±0.05160-1040 (20.1) - 1000±0.07±0.07*1 ( ): Minimum dimension in ID measurement*2 Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.Radiused jaws for accurate ID measurementRangeDEFHLMRSt0 - 300 mm/0 - 12 in75103382044510R5123.80 - 450 mm*10089—2563014.8R101860 - 450 mm/0 - 18 in11251R1060 - 600 mm*10089—2578014.8R101860 - 600 mm/0 - 24 in11251R1060 - 1000 mm*140111—32124017R102480 - 1000 mm/0 - 40 in15062.5R108* Without ne adjustmentLEHStMRFDDIMENSIONS Unit: mm• Inside and outside measurements can be read directly from the upper and lower vernier scales.• The jaws have radiused measuring faces for accurate inside diameter (ID) measurement.• With ne adjustment (Order No. 160-127/128/101/104).
元のページ ../index.html#240