D-24DMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Technical Data• Resolution*1: 0.01 mm or 0.0005 in/0.01 mm• Graduation*2: 0.05 mm• Display*1:LCD• Scale type*1:ABSOLUTE electromagnetic induction linear encoder• Max. response speed*1: Unlimited• Battery: SR44 (1 pc.), 938882, for initial operational checks (standard accessory)• Battery life*1:Approx. 5 years under normal use• Dust/Water protection level*1: IP67 (IEC 60529)*3 *1 Digimatic models *2 Analog models *3 Rustproong shall be applied after use if caliper was in contact with coolant. Optional Accessories for Digimatic ModelsFor details, refer to page A-21.959143: Data hold unit • Connecting cables for IT/DP/MUX 05CZA624: SPC cable with data button (1 m) 05CZA625: SPC cable with data button (2 m)• USB Input Tool Direct 06AFM380A: SPC cable for USB-ITN-A (2 m)• Connecting cables for U-WAVE-T 02AZD790A: SPC cable with data button (160 mm) 02AZE140A: SPC cable for foot switchWireless Data Output • U-WAVE-TC: 264-620 (IP67 type) 264-621 (Buzzer type)• U-WAVE-TCB Transmitter (Mitutoyo Bluetooth® U-WAVE) 264-624 (IP67 type) 264-625 (Buzzer type) Refer to page A-10 for details.• Connecting unit for U-WAVE-TC/TCB 02AZF310 (IP67 type)Note: IP67 model is water/dust-proofed suitable for the factory oor. Buzzer type is not water/dust-proofed.Refer to pages A-10 and A-12 for details. Note: Cannot be used with 573-611-20, 573-612-20 and 573-614Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).• The beam-mounted jaw can be adjusted to facilitate measurement of stepped sections and hard-to-get-at workpiece features.• Digimatic models are IP67 Absolute type. Slider action is smooth, rm and comfortable.• Allows integration into statistical process control and measurement systems for models with measurement data output connector. (Refer to page A-3.)Offset CaliperSERIES 573, 536 —ABSOLUTE Digimatic and vernier types536-101Inch/Metric Digimatic modelOrder No.Range (in)Maximum permissible error (in)*2EMPESMPE573-701-200 - 6±0.001±0.002573-702-200 - 8±0.001±0.002573-704-200 - 12±0.0015±0.0025SPECIFICATIONSMetric Digimatic modelOrder No.Range (mm)Maximum permissible error (mm)*2EMPESMPE573-601-200 - 150±0.02±0.04573-611-20*10 - 150±0.02±0.04573-602-200 - 200±0.02±0.04573-612-20*10 - 200±0.02±0.04573-604-200 - 300±0.03±0.05573-614-20*10 - 300±0.03±0.05Metric Analog modelOrder No.Range (mm)Maximum permissible error (mm)*2EMPESMPE536-1010 - 150±0.05±0.07536-1020 - 200±0.05±0.07536-1030 - 300±0.08±0.10*1 Without thumb roller*2 Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.573-602-20DIMENSIONS Unit: mmOrder No.ModelRange (mm)ABCDGHNWt573-601-20Digimatic model0 - 15016.52114.6401016(18)953.5573-602-200 - 2002024.518.150(4)573-604-200 - 3002227.519.8641520(23.5)1353.8536-101Analog model0 - 1501721.517401016(18)953536-1020 - 20020.52520.550(4)536-1030 - 3002227.522641520(23.5)1353.8AABDDttNNCBCHHWWGGDigimatic modelAnalog model
元のページ ../index.html#243