D-25DMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.CalipersAn industry standard measuring tool• Specially designed for hole Center-to-Center measurements on the same, or offset, planes. • Digimatic models are IP67 Absolute type. Slider action is smooth, rm and comfortable.• Direct reading of pitch measurements is available due to the offset-value setting function.• Allows integration into statistical process control and measurement systems for models with measurement data output connector. (Refer to page A-3.)• Dedicated calibration and inspection tool can be made to order.• Digimatic models need the compensation value (engraved on the moving jaw) added to the displayed value for correct measurement. However, the featured Offset function enables this to be done easily just by pressing the OFFSET button after the jaws are brought together and the ORIGIN button is pressed. Offset Centerline CaliperSERIES 573, 536 —ABSOLUTE Digimatic and vernier types536-105Inch/Metric Digimatic modelOrder No.Range (in)Maximum permissible error (in)*2EMPESMPE573-705-200.404 - 6.4±0.0015573-706-200.404 - 8.4±0.0015573-708-200.404 - 12.4±0.0015SPECIFICATIONSMetric Digimatic modelOrder No.Range (mm)Maximum permissible error (mm)*2EMPESMPE573-605-2010.1 - 160±0.03573-615-20*110.1 - 160±0.03573-606-2010.1 - 210±0.03573-616-20*110.1 - 210±0.03573-608-2010.1 - 310±0.04573-618-20*110.1 - 310±0.04Metric Analog modelOrder No.Range (mm)Maximum permissible error (mm)*2EMPESMPE536-10510.1 - 150±0.05536-10610.1 - 200±0.05536-10710.1 - 300±0.08*1 Without thumb roller*2 Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.Example 1)Example 2)Technical Data• Resolution*1: 0.01 mm or 0.0005 in/0.01 mm• Graduation*2: 0.05 mm• Display*1:LCD• Scale type*1: ABSOLUTE electromagnetic induction linear encoder• Max. response speed*1: Unlimited• Battery: SR44 (1 pc.), 938882, for initial operational checks (standard accessory)• Battery life*1:Approx. 5 years under normal use• Dust/Water protection level*1: IP67 (IEC 60529)*3 *1 Digimatic models *2 Analog models *3 Rustproong shall be applied after use if caliper was in contact with coolant. Optional Accessories for Digimatic Models For details, refer to page A-21.• 959143: Data hold unit • Connecting cables for IT/DP/MUX 05CZA624: SPC cable with data button (1 m) 05CZA625: SPC cable with data button (2 m)• USB Input Tool Direct 06AFM380A: SPC cable for USB-ITN-A (2 m)• Connecting cables for U-WAVE-T 02AZD790A: SPC cable with data button (160 mm) 02AZE140A: SPC cable for foot switchWireless Data Output • U-WAVE-TC: 264-620 (IP67 type) 264-621 (Buzzer type)• U-WAVE-TCB Transmitter (Mitutoyo Bluetooth® U-WAVE) 264-624 (IP67 type) 264-625 (Buzzer type) Refer to page A-10 for details.• Connecting unit for U-WAVE-TC/TCB 02AZF310 (IP67 type) Note: IP67 model is water/dust-proofed suitable for the factory oor. Buzzer type is not water/dust-proofed.Refer to pages A-10 and A-12 for details. Note: Cannot be used with 573-708-20• Inspection equipment for offset caliper 05FAJ735(250)(40)(30)(25)(10)0501001504×ø5Unit: mmCompensation value573-606-20Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).DIMENSIONS Unit: mmRange (mm)HWtApplicable hole10 - 1501675 3ø1.5 - ø9.5 mm10 - 20010 - 30020100 3.8RangeHWtApplicable hole10 - 160 mm/0.4 - 6.4 in16 753.5ø1.5 - ø9.5 mm10 - 210 mm/0.4 - 8.4 in10 - 310 mm/0.4 - 12.4 in201003.8WH1010ø130tWH1010ø130tDigimatic modelAnalog model
元のページ ../index.html#244