D-26DMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Unit: mm(250)(40)(30)(25)(10)0501001504×ø5Technical Data • Resolution: 0.01 mm or 0.0005 in/0.01 mm• Scale type: ABSOLUTE electromagnetic induction linear encoder• Max. response speed: Unlimited• Battery: SR44 (1 pc.), 938882, for initial operational checks (standard accessory)• Battery life: Approx. 5 years under normal useOptional Accessories For details, refer to page A-21.• 959143: Data hold unit • Connecting cables for IT/DP/MUX 05CZA624: SPC cable with data button (1 m) 05CZA625: SPC cable with data button (2 m)• USB Input Tool Direct 06AFM380A: SPC cable for USB-ITN-C (2 m)• Connecting cables for U-WAVE-T 02AZD790A: SPC cable with data button (160 mm)02AZE140A: SPC cable for foot switch• Inspection equipment for offset caliper 05FAJ735Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).• Specially designed to measure hole Center-to-Center and Edge-to-Center distances. Provided with jaws on the back of the slider, measurements can be read easily from above.• Direct reading of pitch measurements is available due to the offset value setting function.• Allows integration into statistical process control and measurement systems for models with measurement data output connector. (Refer to page A-3.)• Dedicated calibration inspection tools are available.ABSOLUTE Back-Jaw Centerline CaliperSERIES 573 -Center-to-Center & Edge-to-Center Types573-718-20573-719-20573-716-20573-717-2030ø1ø203064ø1ø10573-718-20573-716-20DIMENSIONS Unit: mmMetric Center-to-center distance typeOrder No.Range (mm)Maximum permissible error (mm)*2EMPESMPE573-716-20*110.1 - 200±0.10573-717-20*110.1 - 300±0.15SPECIFICATIONSMetric Edge-to-center distance typeOrder No.Range (mm)Maximum permissible error (mm)*2EMPESMPE573-718-20*110.1 - 200±0.10573-719-20*110.1 - 300±0.15*1 Applicable hole diameter: ø1.5 - ø19.5 mm*2 Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.

元のページ  ../index.html#245