D-29DMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.CalipersAn industry standard measuring tool• Dedicated caliper for inside measurement.• Digimatic models are IP67 Absolute type. Slider action is smooth, rm and comfortable.• Allows integration into statistical process control and measurement systems for models with measurement data output connector. (Refer to page A-3.)• Digimatic models 573-645-20 and 573-646-20 need the compensation value (engraved on the xed jaw) added to the displayed value for correct measurement. However, the featured Offset function enables this to be done easily just by pressing the OFFSET button after the jaws are brought together and the ORIGIN button is pressed. ABSOLUTE Inside CaliperSERIES 573, 536 —Knife-edge/Inside Groove/Point Jaw TypeKnife-edge typeSPECIFICATIONSMetric Digimatic modelOrder No.Range (mm)Maximum permissible error (mm)*3RemarksEMPESMPE573-642-2010 - 200±0.05Knife-edge type, Measurable min.573-643-20*110 - 200±0.05Knife-edge type, Measurable min.573-645-20*210.1 - 160±0.05Inside groove type, Measurable min.573-647-20*110.1 - 160±0.05Inside groove type, Measurable min.573-646-20*220.1 - 170±0.03Point jaw type, Measurable min.573-648-20*120.1 - 170±0.03Point jaw type, Measurable min.Inch/Metric Digimatic modelOrder No.Range (in)Maximum permissible error (in)*3RemarksEMPESMPE573-742-200.4 - 8±0.0025Knife-edge type, Measurable min.573-745-20*20.404 - 6.4±0.0025Inside groove type, Measurable min.573-746-20*20.804 - 6.8±0.0015Point jaw type, Measurable min.Metric Analog modelOrder No.Range (mm)Maximum permissible error (mm)*3RemarksEMPESMPE536-14210 - 200±0.12Knife-edge type, Measurable min.536-14510.1 - 150±0.05Inside groove type, Measurable min.536-14620.1 - 150±0.05Point jaw type, Measurable min.536-14730.1 - 300±0.08Point jaw type, Measurable min.536-14870.1 - 450±0.10Point jaw type, Measurable min.536-14970.1 - 600±0.12Point jaw type, Measurable min.*1 Without thumb roller*2 Includes the offsetting function, which indicates the actual measurement value. *3 Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.Technical Data• Resolution*1:0.01 mm or 0.00005 in/0.01 mm• Graduation*2: 0.05 mm• Display*1:LCD• Scale type*1:ABSOLUTE electromagnetic induction linear encoder• Max. response speed*1: Unlimited• Battery: SR44 (1 pc.), 938882, for initial operational checks (standard accessory)• Battery life*1:Approx. 5 years under normal use• Dust/Water protection level*1: IP67 (IEC 60529)*3 *1 Digimatic models *2 Analog models *3 Rustproong shall be applied after use if caliper was in contact with coolant. Optional Accessories for Digimatic ModelsFor details, refer to page A-21.• Connecting cables for IT/DP/MUX 05CZA624: SPC cable with data button (1 m) 05CZA625: SPC cable with data button (2 m)• USB Input Tool Direct 06AFM380A: SPC cable for USB-ITN-A (2 m)• Connecting cables for U-WAVE-T 02AZD790A: SPC cable with data button (160 mm) 02AZE140A: SPC cable for foot switchWireless Data Output • U-WAVE-TC: 264-620 (IP67 type) 264-621 (Buzzer type)• U-WAVE-TCB Transmitter (Mitutoyo Bluetooth® U-WAVE) 264-624 (IP67 type) 264-625 (Buzzer type) Refer to page A-10 for details.• Connecting unit for U-WAVE-TC/TCB 02AZF310 (IP67 type) Note: IP67 model is water/dust-proofed suitable for the factory oor. Buzzer type is not water/dust-proofed.Refer to pages A-10 and A-12 for details. Note: Cannot be used with 573-642-20, 573-643-20 and 573-742-20Inside groove typePoint jaw type573-645-20536-142536-145536-146573-646-20573-642-20Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).Compensation valueCompensation value

元のページ  ../index.html#248