D-32DMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Technical Data• Resolution*1:0.01 mm or 0.0005 in/0.01 mm• Graduation*2: 0.05 mm• Display*1:LCD• Scale type*1:ABSOLUTE electromagnetic induction linear encoder• Max. response speed*1: Unlimited• Battery: SR44 (1 pc.), 938882, for initial operational checks (standard accessory)• Battery life*1: Approx. 5 years under normal use• Dust/Water protection level*1: IP67 (IEC 60529)*3 *1 Digimatic models *2 Analog models *3 Rustproong shall be applied after use if caliper was in contact with coolant.Optional Accessories for Digimatic ModelsFor details, refer to page A-21.• Connecting cables for IT/DP/MUX 05CZA624: SPC cable with data button (1 m) 05CZA625: SPC cable with data button (2 m)• USB Input Tool Direct 06AFM380A: SPC cable for USB-ITN-A (2 m)• Connecting cables for U-WAVE-T 02AZD790A: SPC cable with data button (160 mm) 02AZE140A: SPC cable for foot switchWireless Data Output • U-WAVE-TC: 264-620 (IP67 type) 264-621 (Buzzer type)• U-WAVE-TCB Transmitter (Mitutoyo Bluetooth® U-WAVE) 264-624 (IP67 type) 264-625 (Buzzer type) Refer to page A-10 for details.• Connecting unit for U-WAVE-TC/TCB 02AZF310 (IP67 type) Note: IP67 model is water/dust-proofed suitable for the factory oor. Buzzer type is not water/dust-proofed.Refer to pages A-10 and A-12 for details.Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).• The beam-mounted jaw is a round bar that facilitates measurements of tube wall thickness.• Digimatic models are IP67 Absolute type. Slider action is smooth, rm and comfortable.• Allows integration into statistical process control and measurement systems for models with measurement data output connector. (Refer to page A-3.)Tube Thickness CaliperSERIES 573, 536 —ABSOLUTE Digimatic and vernier types573-661-20536-161SPECIFICATIONSMetric Digimatic modelOrder No.Range (mm)Maximum permissible error (mm)*2EMPESMPE573-661-200 - 150±0.05573-662-20*10 - 150±0.05Inch/Metric Digimatic modelOrder No.Range (in)Maximum permissible error (in)*2EMPESMPE573-761-200 - 6±0.002Metric Analog modelOrder No.Range (mm)Maximum permissible error (mm)*2EMPESMPE536-1610 - 150±0.05*1 Without thumb roller*2 Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.More than ø3573-661-20, 573-662-20*, 573-761-20536-161DIMENSIONS Unit: mmJaw thickness: 3.5 mm for 573-661-20, 573-662-20, 573-761-20 3 mm for 536-161236229ø3ø33.55632403405632（16）16* Without thumb roller
元のページ ../index.html#251