D-34DMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Measurement procedureA consistently low measuring force can be guaranteed by only taking measurements when the pointer is between the two ducial lines. Technical ExplanationTechnical Data• Resolution: 0.01 mm or 0.0005 in/0.01 mm• Display:LCD• Scale type:ABSOLUTE electromagnetic inductive linear encoder• Jaw retraction: 0.3 mm• Max. response speed: Unlimited• Battery: SR44 (1 pc.), 938882, for initial operational checks (standard accessory)• Battery life: Approx. 3.5 years under normal useOptional AccessoriesFor details, refer to page A-21.959143: Data hold unit • Connecting cables for IT/DP/MUX 959149: SPC cable with data button (1 m) 959150: SPC cable with data button (2 m)• USB Input Tool Direct 06AFM380C: SPC cable for USB-ITN-C (2 m)• Connecting cables for U-WAVE-T 02AZD790A: SPC cable with data button (160 mm)02AZE140A: SPC cable for foot switchWireless Data Output • U-WAVE-TC: 264-620 (IP67 type) 264-621 (Buzzer type)• U-WAVE-TCB Transmitter (Mitutoyo Bluetooth® U-WAVE) 264-624 (IP67 type) 264-625 (Buzzer type) Refer to page A-10 for details.• Connecting unit for U-WAVE-TC/TCB 02AZF300 (Buzzer type) Note: IP67 model is water/dust-proofed suitable for the factory oor. Buzzer type is not water/dust-proofed.Refer to pages A-10 and A-12 for details.Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).• An ABSOLUTE electromagnetic induction linear encoder system is incorporated.• Enables accurate measurement of plastic parts and other workpieces that are difcult to measure with conventional calipers due to deformation.• Allows ne feeding easily by using thumb roller.• Displacement of main scale jaw is 0.3 mm.• Measuring force: 0.5 N to 1.0 N • Absolute type. (Refer to page D-6 for a description of Absolute measurement.) Slider action is smooth, rm and comfortable.• Allows integration into statistical process control and measurement systems for models with measurement data output connector. (Refer to page A-3.)ABSOLUTE Low Force CaliperSERIES 573SPECIFICATIONSMetricOrder No.Range (mm)Maximum permissible error (mm)*EMPESMPE573-191-300 - 180±0.05Inch/MetricOrder No.Range (in)Maximum permissible error (in)*EMPESMPE573-291-300 - 7±0.002DIMENSIONS Unit: mm* Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.Note: Dedicated for outside measurement (depth bar is not tted). 573-191-30573-191-30aNTD25-20AX26(26)（40）（299）26164033.543（15.8）（69）
元のページ ../index.html#253