D-43DMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.• Double-column structure ensures high measuring accuracy.• Ergonomic base ts comfortably in the hand. • A bidirectional touch-trigger probe is available as an optional accessory for 192-663-10,192-664-10,192-665-10,192-670-10,192-671-10, 192-672-10 and 192-673-10. • Better readability is provided thanks to display of measurement result with a large character height (11 mm) and high-contrast LCD.• The drive handle is inclined to improve slider operability.• Allows integration into statistical process control and measurement systems for models with measurement data output connector. (Refer to page A-3.)• Battery: SR44 (1 pc.), 938882. For initial operational checks (standard accessory)• Battery life is 3,500 hours in continuous use.• 192-663-10, 192-664-10 and 192-665-10 are provided with a long scriber (overall length of 150 mm).• For precision Black Granite Surface Plates, refer to page E-49.Digimatic Height GageSERIES 192 —Multi-function Type with SPC Data OutputHeight GageA standard measuring tool of industry1501501305050(20)(20)70Preset (2)(150 mm)Preset (1)(50 mm)• Example of preset (1) To measure a height of 70 mm, with a reference plane height of 50 mm• Example of preset (2) To measure a height of 130 mm, with a reference plane height of 150 mmPush the small ne-adjustment knob in to disengage gearing and then turn the large wheel. • Low-voltage alert:When battery voltage becomes low, a warning appears in the display.• Probe-tip diameter compensation:An adjustment is applied to the raw measurement data to compensate for the effect of the size of the spherical contact point used by the bidirectional touch-trigger probe.Pull the ne-adjustment knob out to engage gearing and then turn this knob, which then slowly turns the wheel.Functions• Origin-setting (ABS measurement mode): Any arbitrary value can be stored as the origin point.• Zero-setting (INC measurement mode):Displayed value can be set to zero at any arbitrary position of the slider.• Origin restoration:Previously set origin is restored when switching back to ABS mode. • Presetting (ABS INC measurement mode):Displayed value can be set to any arbitrary value, including negative values. • Measuring directionMeasuring direction can be switched at the press of a button.• Data holdDisplay value can be held. Reverts to ABS or INC mode when cancelled.• Alarm: Error message is displayed when overow or overspeed of displayed value arises and measurement is stopped.• Data output: Allows integration into statistical process control and measurement systems. (Refer to page A-3.)• Fine and coarse height adjustment through knob and wheel combination.Slider height adjustment wheel allows ne and coarse height adjustment.Presetting (2 positions) • With two preset functions, two reference heights can be used relative to a surface plate. Fine adjustmentCoarse adjustmentPower ON/OFF buttonZero set/ABS buttonPreset/probe-tip-diameter compensation mode buttonButton used when presetting and compensating probe tip diameterButton used when presetting measuring direction and compensating probe-tip diameterHeight-adjustment wheelHold/data buttonNote: Probe-tip-diameter compensation mode is a function provided for 192-663-10/192-664-10/192-665-10/192-670-10/ 192-671-10/192-672-10/192-673-10.SPECIFICATIONSMetricOrder No.Range (mm)Resolution (mm)Maximum permissible error EMPE (mm)*Max. response speed (mm/s)Height (mm)Mass (kg)192-663-100 - 3000.01/0.005 (selectable)±0.025005105.7192-664-100 - 600±0.048028.3192-665-100 - 1000±0.06122815.7192-613-100 - 300±0.024754.7192-614-100 - 600±0.058028.3192-615-100 - 1000±0.07122815.7* Maximum permissible error, EMPE is the term (notation) used in JIS B 7517: 2018, revised based on ISO/TR 14253-6: 2012.Inch/MetricOrder No.Range (in)ResolutionMaximum permissible error EMPE (in)*Max. response speed (mm/s)Height (mm)Mass (kg)192-670-100 - 120.01 mm/0.005 mm (selectable)0.0005 in/0.0002 in (selectable)±0.0015005105.7192-671-100 - 18±0.00156497.5192-672-100 - 24±0.00158028.3192-673-100 - 40±0.0025122815.7192-630-100 - 12±0.0014754.7192-631-100 - 18±0.0026497.5192-632-100 - 24±0.0028028.3192-633-100 - 40±0.003122815.7* Maximum permissible error, EMPE is the term (notation) used in JIS B 7517: 2018, revised based on ISO/TR 14253-6: 2012.192-663-10192-613-1010°Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).