D-47DMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.• ABS and INC measurement modes allow efcient operation.• Rigid structure makes instrument suitable for use in severe work environments.• The +/- measurement function widens the application range.• Allows integration into statistical process control and measurement systems. (Refer to page A-3.)• Battery: SR44 (1 pc.), 938882. For initial operational checks (standard accessory)• Battery life is 5,000 hours under normal use.• Carbide-tipped scriber (900173 for 570-227 and 244, and 905200 for 570-230 and 248) is provided as a standard accessory. (Standard accessory: scriber clamp 901338 for 570-227 and 244, and 05GZA033 for 570-230 and 248)• When a dial indicator or test indicator is used with 570-227 and 244, the dedicated holding bar (953639, overall length 50 mm) is recommended for use. However, MPE (Maximum permissible error) may be larger because the measurement point is further from the beam. • For precision Black Granite Surface Plates, refer to page E-49.ABSOLUTE Digimatic Height GageSERIES 570 —Standard modelHeight GageA standard measuring tool of industryFunctionsZero-setting+/- directional measurementData holdData outputPresettinginch/mm reading (inch/mm models)Preset value memoryOrigin restorationLow battery voltage alertCounting value composition error alertOptional AccessoriesFor details, refer to page A-21.• Connecting cables for IT/DP/MUX 905338: SPC cable with data button (1 m) 905409: SPC cable with data button (2 m)• USB Input Tool Direct 06AFM380F: SPC cable for USB-ITN-F (2 m)• Connecting cables for U-WAVE-T 02AZD790F: SPC cable with data button (160 mm) 02AZE140F: SPC cable for foot switchSPECIFICATIONSMetricOrder No.Range (mm)Resolution (mm)Fine feed (mm)Maximum permissible error EMPE (mm)*Height (mm)Mass (kg)570-2270 - 2000.014±0.033551.4570-2300 - 10006±0.07126016.8* Maximum permissible error, EMPE is the term (notation) used in JIS B 7517: 2018, revised based on ISO/TR 14253-6: 2012.Inch/MetricOrder No.Range (in)ResolutionFine feed (in)Maximum permissible error EMPE (in)*Height (mm)Mass (kg)570-2440 - 80.0005 in/0.01 mm0.16±0.0023551.4570-2480 - 400.24±0.003126016.8* Maximum permissible error, EMPE is the term (notation) used in JIS B 7517: 2018, revised based on ISO/TR 14253-6: 2012.570-227Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).