D-66DMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.• The end of the main beam is hook-shaped to allow depth and thickness measurements of a projected portion or lip in a hole, in addition to standard depth measurement.• Coolant proof models achieve IP67 protection level.• Enables stable depth measurement with a resolution of 0.01 mm.• ABSOLUTE Digital Caliper (Refer to page D-6 for ABSOLUTE function.)• Digimatic models 571-254-20 and 571-255-20 need the compensation value (engraved on the base) added to the displayed value for correct depth measurement. However, the featured Offset function enables this to be done easily just by pressing the OFFSET button after the hook jaw is brought in contact with the base and the ORIGIN button is pressed.• Slider operation of the Digimatic models is smooth and comfortable. • Allows integration into statistical process control and measurement systems for models with measurement data output connector. (Refer to page A-3.)• Battery: SR44 (1 pc.), 938882. For initial operational checks (standard accessory)• Battery life: Approx. 5 years under normal use (for Digimatic models)• Optional longer extension bases are available. (Refer to page D-68.)Depth GageSERIES 527, 571 — Hook End Type Pin End TypeL1L1 = Readingon depthvernierL2L2 = Readingon hookvernierL3 = Reading onhook vernier- Readingon depthvernierL3Optional Accessories for Digimatic ModelsFor details, refer to page A-21.• Connection cables for IT/DP/MUX 05CZA624: SPC cable with data button (1 m) 05CZA625: SPC cable with data button (2 m) Note: Optional connecting cable is available only for water-proof type.• USB Input Tool Direct 06AFM380A: SPC cable for USB-ITN-A (2 m)•Connecting cables for U-WAVE-T 02AZD790A: SPC cable with data button (160 mm)02AZE140A: SPC cable for foot switchWireless Data Output • U-WAVE-TC: 264-620 (IP67 type) 264-621 (Buzzer type)• U-WAVE-TCB Transmitter (Mitutoyo Bluetooth® U-WAVE) 264-624 (IP67 type) 264-625 (Buzzer type) Refer to page A-10 for details.• Connecting unit for U-WAVE-TC/TCB 02AZF310 (IP67 type)Note: IP67 model is water/dust-proofed suitable for the factory oor. Buzzer type is not water/dust-proofed.Refer to pages A-10 and A-12 for details.Typical applicationsSPECIFICATIONSMetric Order No.Range (mm): L1 (L2 and L3)Resolution/Graduation (mm)Base (W×T) (mm)Maximum permissible error EMPE (mm)*1 Digimatic (LCD)571-254-20*210.1 - 160 (0 - 150)0.01100×6±0.03571-255-20*210.1 - 210 (0 - 200)571-301-20*20 - 150±0.02571-302-20*20 - 200 Analog527-40110 - 150 (0 - 150)0.05100×6.5±0.05527-40210 - 200 (0 - 200)527-40310 - 300 (0 - 300)±0.08527-41110 - 150 (0 - 150)0.02±0.03527-41210 - 200 (0 - 200)527-41310 - 300 (0 - 300)±0.04*1 Maximum permissible error, EMPE, is the term (notation) used in JIS B 7518: 2018, revised based on ISO/TR 14253-6: 2012.*2 IP67 Coolant Proof modelBase527-401Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).Inch/MetricOrder No.Range: L1 (L2 and L3)ResolutionBase (W×T) (mm)Maximum permissible error EMPE*1 Digimatic (LCD)571-264-20*20.4 in - 6.4 in (0 - 6 in)0.0005 in/0.01 mm100×6±0.0015 in/±0.03 mm571-265-20*20.4 in - 8.4 in (0 - 8 in)571-311-20*20 - 150 mm/0 - 6 in0.0005 in/0.01 mm±0.001 in/±0.02 mm571-312-20*20 - 200 mm/0 - 8 in*1 Maximum permissible error, EMPE, is the term (notation) used in JIS B 7518: 2018, revised based on ISO/TR 14253-6: 2012.*2 IP67 Coolant Proof model571-254-20Compensation value571-302-20DIMENSIONS Range (mm)L0 - 1502600 - 2003100 - 300410Range (mm)L0 - 1502390 - 20028921100109.5L2-ø5114527-401, -402, -403L59.93.510261637.9100702072×ø51010571-254-20, 571-255-20L37.93.5100702016ø1.97459.92×ø57610571-301-20, 571-302-20Range (mm)L0 - 1502490 - 200299Unit: mm
元のページ ../index.html#285