D-68DMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.• Attaches to the base (reference face) plate of a depth gage to extend its span.• Refer to the illustrations at left for attachment details. • Extension base is three times the length of the base for models of less than 300 mm range.Note: These extension bases cannot be attached to 0 to 450 mm, 0 to 600 mm, 0 to 750 mm, 0 to 1,000 mm, 0 to 18 inch, 0 to 24 inch, 0 to 30 inch and 0 to 40 inch range models. Extension BasesOptional accessory for Depth Gage• Attaching this depth gage attachment to the depth measurement face of the caliper makes depth measurement accurate and secure.Depth Gage AttachmentOptional Accessory for Calipers900372Extension baseExtension baseDepth gage baseMounting screw M4WasherLBA177ABAR5R5 n holes tapped M4×0.7BDEAABCDEDIMENSIONS Unit: mmDIMENSIONS Unit: mmExample of attaching the extension baseExample of attaching the depth gage attachmentSPECIFICATIONSMetricOrder No.Size L (mm)n900370180290037126059003723204InchOrder No.Size L (in)n90036772900368105900369124Order No.ABLn900370705518029003713560260590037270553204050084-10SPECIFICATIONSMetricOrder No.Size (mm)Applicable measuring range of caliper050083-1075100 mm, 150 mm, 200 mm, 4 in, 6 in and 8 in050084-10100100 mm, 150 mm, 200 mm, 4 in, 6 in and 8 in050085-10125300 mm (12 in)Size (mm)ABCDET75257526.51318.5121001001253012528.52014T: Base thicknessNote: Align reference planes of the depth gage base and extension base using a surface plate and then tighten mounting screws.Note: Align reference planes of the depth gage base and extension base using a surface plate and then tighten mounting screws.
元のページ ../index.html#287