A-5AMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Measurement Data ManagementConvenient data collection tool and quality control softwareDigimatic Gage/PC Data Input DeviceUSB Input Tool Direct USB-ITNA data collection tool that offers simple and popular operability (HID connection) and optional software to input data to Microsoft Excel at a reasonable price. A more sophisti-cated way to improve operational efciency.Input data to the PC with the push of a button.The result is the same as typing a number from the keyboard and pressing Enter.Just press the data button to send the displayed value to the PC.USB-ITN System CongurationUse USB-ITN standalone as a dedicated interface for Digimatic indicators compatible with HID keyboard devices.Using USB-ITN in combination with dedicated optionsCan be connected directly to a USB port on a PC with 1 cable.USB Input Tool Direct USB-ITN-BUSB Input Tool Direct is automatically recognized as a HID* keyboard device (standard driver of Windows) by connecting it to a USB port.* Human Interface DeviceIn common with the popular model IT-016U, this device is capable of entering measurement data to Microsoft Excel or a memo pad.Application example: using USB-ITN standalone to input data while selecting the data entry point flexibly during a measurement whose procedures cannot be determined in advance (such as the inspection of items or trial products with few measurements or without repeated procedures).If you need more than just the ability to load the measurement data to Excel, the optional software USB-ITPAK can create a data input procedure to an Excel sheet to improve the operational efficiency of repeated inspections. Application example: using USB-ITN in combination with USB-ITPAK V2.1 to improve the operational efficiency of daily inspections such as sampling tests or complete inspections of mass-produced product.Refer to pages A-15 to A-17 for details.USB-ITNMain specication• Output compatibility: USB1.0 or USB2.0• Supporting driver software: Switchable between 2 items below 1) When using standalone: HID keyboard device* 2) When using with USB-ITPAK V2.1: Virtual COM port (VCP)• Communication speed: 12 Mbps (Full Speed)• Power supply: USB bus power• Mass: 59 g• USB2.0 certicate• Conforms to EU EMC Directives.* Since this device is compatible with Windows standard driver software, dedicated driver software is not required.System Environment• Hardware:PC with USB socket (Type A)• Supporting OS:Windows 2000 SP4Windows XP SP2 (or later)Windows VistaWindows 7Windows 8/8.1Windows 10• Software:Programs supporting keyboard input(Excel, Word, memo pad, etc.)USB socket(Type A)Connection portUSB Input Tool Direct USB-ITNConnector shapeABCDEFGConnect the Digimatic connector to the gageConnector is plugged into a USB port on a PCDigimatic gagesUSB Input Tool Direct USB-ITNFoot Switch (optional)USB-FSW (optional)PCUSB-ITPAK V2.1 (optional)Gage selector 3 (optional)Note: Only connectable with USB-ITN-D.CBFDigimatic caliperDigimatic indicatorDigimatic micrometerRefer to pages A-21 and A-22 for details of Digimatic ports and connectors.TypeOrder No.Data switchA06AFM380A✓B06AFM380B✓C06AFM380C✓D06AFM380D–E06AFM380E–F06AFM380F–G06AFM380G–Data loading methods• Data switch on the input tool (Type A/B/C only)• Data switch on the measuring gage• Command transmission from a PC** Only available when using USB-ITPAK V2.11) Icon operation2) Function key operation3) Foot switch operationOne of the above operationsFoot Switch (optional)Option for USB-ITN USB Foot Switch Adapter USB-FSW937179T06ADV384Cable length: 2 mNote 1: When using a foot switch in combination with USB-ITN, the optional USB-FSW and USB-ITPAK V2.1 are required.Note 2: When the measuring gage and USB-ITN have no data pushbuttons, the optional USB-ITPAK V2.1 is required.Measurement Data Collection SoftwareUSB-ITPAK V2.1 (optional)06AFM386Refer to pages A-15 to A-17 for details of the options.Cable length: 2 m
元のページ ../index.html#30