E-21EMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.• Square gauge block sets have several unique characteristics (Refer to page E-4 for details). A wide choice is provided to best match the target applications: sets containing from 2 to 112 blocks are available.• It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to t together correctly.Metric/Inch Square Gauge Block SetsSERIES 516 — Metric Block Sets, Long Block Sets, Wear Block SetsSteel 103-block setSteel 76-block setSteel 47-block setWear block set Tungsten Carbide These square wear gauge blocks made of cemented carbide have excellent resistance to abrasion, making them ideal for protecting the ends of a stack of blocks subject to frequent use. Available in two nominal sizes: 1 mm and 2 mm. We recommend that these wear gauge blocks of both sizes be wrung rmly to the stack when in use. Steel 8-block setGauge BlocksLength Standards Brought to You by MitutoyoAn inspection certicate is supplied as standard. Refer to page U-9 for details.Steel 112-block setLong block setSteel 32-block set
元のページ ../index.html#312