E-25EMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.• To expand the application of square gauge blocks, Mitutoyo offers the Gauge Block Accessories Set. Square gauge blocks have a much broader range of application than rectangular gauge blocks due to the central clamping hole. Also, the accessories included in the set are sold individually depending on the application. • It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly.Square Gauge Block Accessories Set SERIES 516516-611Gauge BlocksLength Standards Brought to You by MitutoyoInchOrder No.516-612Included in setQuantitySupplied619050Half-round jaw 0.125 in2 pcs.619051Half-round jaw 0.25 in619052Plain jaw 0.5 in619053Center point 0.1 in1 pc.619054Scriber point619055Base 0.5 in619056Stud2 pcs.619057Flat head screw 11/4 in619058Flat head screw 5/8 in619059Slotted head nut619060Adjustable tie rod 6 in619061Adjustable tie rod 41/2 in619062Tie rod 3 in1 pc.619063Tie rod 21/4 in619064Tie rod 11/2 in619065Tie rod 3/4 in619066Knurled head screw2 pcs.SPECIFICATIONSMetricOrder No.516-611Included in setQuantitySupplied619070Half-round jaw 2 mm2 pcs.619071Half-round jaw 5 mm619072Plain jaw 10 mm619073Center point 2 mm1 pc.619054Scriber point619074Base 10 mm619056Stud2 pcs.619057Flat head screw 11/4 in619058Flat head screw 5/8 in619059Slotted head nut619060Adjustable tie rod 6 in619061Adjustable tie rod 41/2 in619062Tie rod 3 in1 pc.619063Tie rod 21/4 in619064Tie rod 11/2 in619065Tie rod 3/4 in619066Knurled head screw2 pcs.Note: 2 pcs. of half-round jaw, plain jaw, stud, at head screw, slotted head nut, adjustable tie rod, and knurled head screw are included in each set. Please note that the abovementioned Order No. indicates only 1 set.Using plain jaws, gauge blocks, a tie rod and a knurled-head screw a gage was constructed to enable rapid checking of the accuracy of a caliper at selected points.Using plain jaws, gauge blocks, a tie rod and a knurled-head screw a gage was constructed to enable rapid comparison measurement of a stepped workpiece. (Sample workpiece)Square gauge block applicationsExample of a gage for comparison measurement of a stepped workpieceExample of a gage for checking caliper accuracy
元のページ ../index.html#316