E-28EMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.• Mitutoyo can manufacture Gauge Blocks and reference gages to your size and design, including precision spacers and stepped masters, which normally absorb much time and effort to manufacture in-house. Special processing including boring, step gaging and special marking is available. Consult us for details.• Nominal size range · 0.1 mm to 1000 mm (steel) · 0.5 mm to 500 mm (ceramic) · 30 mm to 1000 mm (low expansion ceramic)• Nominal size increment · 0.0005 mm (up to 100 mm) · 0.001 mm (over 100 mm) • Cross section (same as the standard product) · Nominal length of 10 mm or less: 30×9 mm · Nominal length of more than 10 mm: 35×9 mm · Square types are also available.Notes on “coupling holes” on custom gauge blocks:·Steel, from 100 mm to less than 500 mmWithout coupling holes(If needed, please notify.) ·Steel, from 500 mm to less than 1000 mm With coupling holes(If not needed, please notify.)·Ceramic, from 100 mm to less than 500 mm With coupling holes(If not needed, please notify.)Custom-made Blocks & Gages(2)(3)(4)(5)(6)(7)(8)(9)(10)(11)(12)(13)(1)Typical applications of custom-made gauge blocks and reference gages. Please enquire for price and delivery times for your particular requirements.Ceramic (1) Square gauge block (2.1005 mm)(2) Rectangular gauge block (6.34 mm)(3) Rectangular gauge block (20.64 mm)(4) Rectangular gauge block (21.94 mm)Steel(5)Square gauge block (2.2065 mm)(6)Square gauge block (10.72 mm)(7)Rectangular gauge block (31.5 mm)(8)Rectangular gauge block (10.02 mm)(9)Rectangular gauge block (9.694 mm)(10) Rectangular gauge block (6.156 mm)(11) Rectangular gauge block (3.603 mm)(12) Rectangular gauge block (1.1505 mm)(13) Rectangular gauge block (0.555 mm)● CERA block 20×35×T18● Steel block ø13.8×T5.7● CERA block 46×46×T3.16● Steel block 15×100×T10● Steel block 30×30×T1.1● CERA block ø45×T10● CERA reference plate Flatness: 0.3 μm (50×50×10)● CERA stepped master block Adjacent step: 40/30/20/10 μmSpecial gauge blocks (T: nominal), CERA stepped master blockUnit: mm
元のページ ../index.html#319