F-3FMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.• Solar powered, this series consists of environmentally friendly measuring instruments that do not require batteries, eliminating the need for battery replacement. Their minimum operating luminance is 40 lux (lx), lower than that inside a warehouse.• The large-capacity built-in reservoir capacitor allows you to use the indicator for long periods of time under lighting conditions below the minimum level.• All functions can be accessed by using the two or three large buttons on the front of the indicator.• Origin recorded even if display disappears.The indicator includes an ABS (absolute) scale that allows the previously set origin to be restored even if the display disappears due to insufcient lighting, making it easy to resume measurement. This feature makes ID-SS ideal for long-time or multi-point measurement.• Three types of accessories (optional) are available to enable spindle lifting in various measurement settings.• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems. (Refer to page A-3)ABSOLUTE Solar-Powered Digimatic Indicator ID-SSSERIES 543Digimatic IndicatorsComparison measuring instruments which ensure high quality, high accuracy and reliability.543-500Technical Data• Display: 6-digit LCD, sign• Usable orientations: All• Power supply: Solar battery (for indoor use)• Minimum Operating illumination: 40 lux (lx)Note: Rechargeable; can be used for approximately 3.5 hours when fully charged. Charging time is approximately 1.5 hours under 500 lux (lx) lighting conditions.• Maximum response speed: No limit (scan-type measurement is not supported)Functions• Origin set (Zero-setting)• Direction switching• Data output• Error alarm displayAn inspection certicate is supplied as standard. Refer to page U-9 for details.SPECIFICATIONSMetricOrder No.Range (mm)Resolution (mm)Maximum permissible error*1 (mm)Measuring force MPL (N)Back typeNet mass (g)MPEE*2Hysteresis MPEHRepeatability MPER543-50012.70.0010.0030.0020.0021.5 or lessWith lug150543-500BFlat140543-5050.010.020.020.01With lug150543-505BFlat140Inch/MetricOrder No.RangeResolutionMaximum permissible error*1Measuring force MPL (N)Back typeNet mass (g)MPEE*2Hysteresis MPEHRepeatability MPER543-5010.5 in/12.7 mm0.00005 in /0.001 mm±0.0001 in/0.003 mm0.0001 in/0.002 mm0.0001 in/0.002 mm1.5 or lessWith lug150543-501BFlat140543-502With lug165543-502BFlat140543-5060.0005 in/0.01 mm±0.0010 in/0.02 mm0.0010 in/0.02 mm0.0005 in/0.01 mmWith lug150543-506BFlat140543-507With lug165543-507BFlat140*1 These values apply at 20 °C.*2 Error of indication for the total measuring rangeNote: Regarding origin setting, refer to “Origin Setting of Digimatic Indicators” on page F-25.Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details). ISO/JIS type ASME/ANSI/AGD type
元のページ ../index.html#344