F-7FMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Digimatic Indicators Comparison measuring instruments which ensure high quality, high accuracy and reliability.Technical Data• Display: 6-digit LCD, sign• Battery: SR44 (1 pc.), 938882 for initial operational checks (standard accessory)• Battery life: Approx. 7,000 hours of continuous use. Approx. 1.2 years under normal use.Note: Depends on use of the indicator. The above values are reference values.• Maximum response speed: No limit (except for scanning measurement)Functions• Zero-setting (INC system)• Presetting (ABS system)• Direction switching• Tolerance judgment• Resolution switching (For 0.001 mm or 0.00005 inch resolution models)• Calculation: f(x) =Ax• Function Lock• Data output• Display value holding (when no external device is connected)• 330° rotary display• Low battery/voltage alarm display• Error alarm displayOptional Accessories• Lifting Lifting lever: 21EZA198 (12.7 mm/0.5 inch ISO/JIS type) 21EZA199 (12.7 mm/0.5 inch ASME/ANSI/AGD type) Lifting cable: 21JZA295 (stroke 12.7 mm: 12.7 mm/0.5 inch models) (stroke 25.4 mm: 25.4 mm/1 inch and 50.8 mm/2 inch models) Lifting knob: 21EZA105 (12.7 mm/0.5 inch ISO/JIS type)*1 21EZA150 (12.7 mm/0.5 inch ASME/ANSI/AGD type)*1 21EZA197 (25.4 mm/1 inch models) 21EZA200 (50.8 mm/2 inch models) Lifting lever:137693 (for measuring range: 25.4 and 50.8 mm) (supplied with 25.4 mm and 50.8 mm models as standard.)*1 Not available for low measuring force models.• Auxiliary spindle spring: 02ACA571 (25.4 mm/1 inch models)*2 02ACA773 (50.8 mm/2 inch models)*2*2 Required when orienting the indicator upside down.• Lug-on-Center Back: 101040 (25.4 mm/1 in and 50.8 mm/2 in, ISO/JIS type) 101306 (25.4 mm/1 in and 50.8 mm/2 in, ASME/ANSI/AGD type)• SPC Cable: 905338 (1 m) 905409 (2 m)• USB Input Tool Direct (2 m): 06AFM380F• Input Tool Series IT-016U (USB Keyboard Signal Conversion Type): 264-016-10 IT-007R (RS-232C Communication Conversion Type): 264-007• Connecting Cables for U-WAVE-T (160 mm): 02AZD790F For foot switch: 02AZE140F• Digimatic Mini-Processor DP-1VA LOGGER: 264-505• Contact points for Mitutoyo’s dial indicators (Refer to pages F-57 to F-60 for details.)• Interchangeable backs for 2 series (Refer to page F-61 for details.)• Measuring stands (Refer to pages F-84 to F-91 for details.)ABLOLUTE Digimatic Indicator ID-CXSERIES 543 — Standard Type• The ABS (absolute) scale restores the last origin position automatically when the indicator is turned on. • Thanks to Mitutoyo's ABSOLUTE Linear Encoder, reliability has been increased due to elimination of over-speed errors. • Tolerance judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/NO-GO) can be displayed in full-size characters. • Battery life of approx. 7,000 hours in continuous use has been achieved with only one battery. • Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems. (Refer to page A-3) The popular three-large button design, which is used in products such as the ABS coolant proof Digimatic indicators ID-N/B, makes buttons easier to press and operations easier to perform. • Three large buttons Actual size11 mmThe large LCD incorporates 11 mm characters giving 1.5 times the character area of conventional products (which display 8.5 mm characters) making measurement values much easier to read. • Large LCD• Calculation: f (x) =Ax Mounting the ID-CX on a measuring jig and setting the multiplying factor (to any practical value) allows direct indication of size (see example below) without using a conversion table and so improves measurement efciency.• Function Lock Ensures reliability of measurement by locking the settings to prevent preset function settings from being changed by mistake.• Power switch • Data output (when connected to an external device)• Data hold (when no external device is connected)• Parameter setting modeCount direction switching, tolerance judgment setting, resolution switching, scale factor setting, and function lock setting• inch/mm conversion(inch/mm models)Switches between the ABS (preset) and INC (zeroset) measurement modesThe display can be rotated 330°, allowing use at a position where you can easily read the measurement value.• 330º rotary display330°330°Typical applicationNote: The measuring jig is not supplied with the ID-CX.Measuring range 25.4 mm543-470BMeasuring range 50.8 mm543-490BAn inspection certicate is supplied as standard. Refer to page U-9 for details.Low measuring force model543-394BMeasuring range 12.7 mm543-390BProducts equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).
元のページ ../index.html#348