F-10FMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Functions• Zero-setting (INC system)• Presetting (ABS system)• Direction switching• Tolerance judgment• LCD readout reversal• Resolution switching (For 0.001 mm or 0.00005 in resolution models)• Data output• Display value holding (when no external device is connected)• Low battery voltage alarm display• Error alarm displayABSOLUTE Digimatic Indicator ID-N/BSERIES 543 —with Dust/Water Protection Conforming to IP66• Our unique ABS scale restores the last origin position automatically when the indicator is turned on. • The chance of overspeed errors has been eliminated thanks to the ABS scale.• Rated to IP66: can be used satisfactorily even in adverse environments where the indicator is subject to splashing by cutting uid or coolant. • Slim body design (body width: only 35 mm) is advantageous in multipoint measurement situations where space is restricted. The LCD readout can also be rotated 180° to allow reading from the most convenient direction. • Succeeded in digitalization of the Back Plunger type widely used for dial indicators for ID-B. A 5 mm-stroke plunger with a higher degree of accuracy has been implemented by adopting a direct reading scale for plunger displacement.• Tolerance judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/NO-GO) can be displayed in full-size characters. • Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems. (Refer to page A-3)LCD readout reversal functionRated to IP66 water- and dust-proong standard and oil resistance improved. Body width 35 mmDigimatic IndicatorsComparison measuring instruments which ensure high quality, high accuracy and reliability.SPECIFICATIONSMetricOrder No.Range (mm)Resolution (mm)Maximum permissible error (mm)Measuring force MPL (N)RemarksMPEE*Hysteresis MPEHRepeatability MPER543-57012.70.010.020.020.012.5 or lessSlim type543-5805.02.0 or lessBack Plunger type543-57512.70.01/0.001(selectable)0.01/0.0030.0020.0022.5 or lessSlim type543-5855.02.0 or lessBack Plunger typeInch/MetricOrder No.Range (in)ResolutionMaximum permissible errorMeasuring force MPL (N)RemarksMPEE*Hysteresis MPEHRepeatability MPER543-5710.50.0005 in/0.01 mm±0.001 in/0.02 mm0.001 in/0.02 mm0.0005 in/0.01 mm2.5 or lessSlim type543-5810.22.0 or lessBack Plunger type543-5760.50.00005/0.0005 in0.001/0.01 mm(selectable)±0.0001 in/0.003 mm0.0001 in/0.002 mm0.0001 in/0.002 mm2.5 or lessSlim type543-5860.22.0 or lessBack Plunger type* Error of indication for the total measuring rangeNote: One silver oxide button cell (SR44) for monitor included543-575543-585Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details). ISO/JIS type ASME/ANSI/AGD typeAn inspection certicate is supplied as standard. Refer to page U-9 for details.
元のページ ../index.html#351