F-12FMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.ABSOLUTE Digimatic Indicator ID-CSERIES 543 — Peak-Value Hold TypeDigimatic IndicatorsComparison measuring instruments which ensure high quality, high accuracy and reliability.SPECIFICATIONSMetricOrder No. (w/lug, at-back)Range (mm)Resolution (mm)Maximum permissible error (mm)Measuring force MPL (N)Power supplyBattery life (normal use)*4Net mass (g)MPEE*3Hysteresis MPEHRepeatability MPER543-30012.70.001/0.01(selectable)0.0030.0020.0021.5 or lessCR2032×1 pc.Approx. 1 year180543-300B170Inch/MetricOrder No.(w/lug, at-back)RangeResolution Maximum permissible errorMeasuring force MPL (N)Power supplyBattery life (normal use)*4Net mass (g)MPEE*3Hysteresis MPEHRepeatability MPER543-3010.5 in/ 12.7 mm0.00005/ 0.0001/ 0.0005 in, 0.001/0.01 mm(selectable)±0.00010 in /0.003 mm0.00010 in/0.002 mm0.00010 in/0.002 mm1.5 or lessCR2032×1 pc.Approx. 1 year180543-301B170543-302195543-302B170*3 Error of indication for the total measuring range *4 Applies only if not connected to a data processor. Battery life depends on use of the indicator. Use the above value as a guide only.Note: Products with an Order No. sufxed “B” have a at back.543-300/543-300B• Run-out/MAX-MIN Hold function enables GO/±NG judgment*1 for peak or difference values.• Five buttons, status icons, and clear button indications allow for easy operation of a wide variety of functions. • Wide LCD and new analog bar graph are now standard on all models.• The ABS (absolute) scale restores the last origin position*2 automatically when the indicator is turned on, and realizes high reliability by eliminating over-speed errors.Functions• Peak detection (MAX/MIN)• Runout (MAX - MIN) HoldNote: Peak detection 1) Sampling rate: 50 readings/sec 2) Capturing speed: 50 µm/sec (max.)• Zeroset (INC system)• Preset function (ABS system)• Counting direction switching• Tolerance judgment (P1, P2, P3, and INC can be stored)• Resolution selection• Simple calculation f(x) =Ax• Analog bar resolution selection• Key lock• in/mm conversion (inch/mm models)• Display hold (when no external device is connected)• Data output• External PC setting input• Display rotation (330°)• Low battery voltage alarm display• Error alarm displayOptional Accessories• Lifting Lifting lever 21EZA198 (ISO/JIS Type), 21EZA199 (ASME/ANSI/AGD Type) Lifting cable 21JZA295 Lifting knob 21EZA105 (ISO/JIS Type), 21EZA150 (ASME/ANSI/AGD Type)• SPC Cable: 905338 (1 m) 905409 (2 m)• USB Input Tool Direct (2 m) : 06AFM380F• Input Tool Series IT-016U (USB Keyboard Signal Conversion Type): 264-016-10 IT-007R (RS-232C Communication Conversion Type): 264-007• Connecting Cables for U-WAVE-T (160 mm): 02AZD790F For foot switch: 02AZE140F• Digimatic Mini-Processor DP-1VA LOGGER: 264-505• Parameter setup kit: 21EZA313Note: Parameter setting software (can be downloaded for free from the Mitutoyo website) is also required.An inspection certicate is supplied as standard. Refer to page U-9 for details.Parameter setup kitParameter setting softwareProducts equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details). ISO/JIS type ASME/ANSI/AGD type• By using the parameter setup kit (optional) and the dedicated software, the functions and the parameters can be congured using a computer.• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems. (Refer to page A-3)*1 Tolerance judgment results cannot be output.*2 Regarding origin setting, refer to “Origin Setting of Digimatic Indicators” on page F-25.
元のページ ../index.html#353