F-23FMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Inch/MetricOrder No.*1RangeResolutionMaximum permissible errorMeasuring force MPL (N)Net mass (g)MPEE*2Hysteresis MPEHRepeatability MPER543-5621.2 in/30.4 mm0.00002/ 0.00005/ 0.0001 in, 0.0005/ 0.001 mm(selectable)±0.00006 in/0.0015 mm0.00006 in/0.0015 mm0.00004 in/0.001 mm2.0 or less300543-5642.4 in/60.9 mm±0.0001 in/0.0025 mm0.0001 in/0.0025 mm2.5 or less*1 To denote your AC power cable add the following sufxes to the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, K for KC, No sufx is required for JIS/100 V*2 Error of indication for the total measuring rangeDigimatic IndicatorsComparison measuring instruments which ensure high quality, high accuracy and reliability.SPECIFICATIONSMetricOrder No.*1Range (mm)Resolution (mm)Maximum permissible error (mm)Measuring force MPL (N)Net mass (g)MPEE*2Hysteresis MPEHRepeatability MPER543-56130.40.0005/ 0.001(selectable)0.00150.00150.0012.0 or less290543-56360.90.00250.00252.5 or less305 ISO/JIS type ASME/ANSI/AGD typeNote 1: The indicator can output SPC (Digimatic) data consisting of up to 6 digits in full. If the data consists of 7 digits the rst digit is not output (example: 123.4565 mm is output as 23.4565 mm). Note 2: Regarding origin setting, refer to “Origin Setting of Digimatic Indicators” on page F-25.Note 3: The orientation for use can be from vertical (contact point pointing downward) to horizontal (spindle in horizontal orientation).ø1290 (60)7.361.5 (31)77.3 (47.3)ø8 0-0.0093011460ø4.8311.3 (251.3)3111Ball contact (ø3)901312(threaded: M2.5×0.45)DIMENSIONSUnit: mmISO/JIS TypeUnit: inASME/ANSI/AGD Typeø0.192.36ø0.473.54 (2.36)90(60)ø4.8601143077.3(47.3)61.5(31)7.3ø121.184.491.220.4331111/43.01 (1.83)2.42 (1.22)ø8 0 -0.009ø0.375 0 -0.0012Ball contact (ø3)901312(thread: M2.5×0.45)Ball contact (ø0.12)21BZB005(thread: No. 4-48UNF)Note: ( ) = 543-562Note: ( ) = 543-561

元のページ  ../index.html#364