F-24FMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Technical Data• Display: 6-digit LCD, sign, and analog bar with 2-color backlight• Power supply: 9 VDC, 1.2 A (via AC adapter) 06AGC585*1 *1 To denote your AC power cable add the following sufxes to the order No.: JA for UL/CSA and PSE, D for CEE, DC for CCC, E for BS, K for KC• Lifting lever: 137693 (standard accessory)Functions• Max/Min value hold• Runout measurement (MAX - MIN) • Zero-setting (INC system)• Presetting (ABS system)• Direction switching• Tolerance judgment• Digital display switching (0.01 mm 0.001 mm)• Analog resolution selection (±0.02, ±0.04, ±0.1, ±0.2, ±0.4 mm)• Function Lock• Data output• Error alarm displayOptional Accessories• Lifting cable: 21JZA295 (stroke 25.4 mm)• Lug-on-center back: 101040(ISO/JIS type) 101306 (ASME/ANSI/AGD type)• Auxiliary spindle spring: 02ACA571 (25.4 mm/1 inch models) 02ACA773 (50.8 mm/2 inch models)• SPC cable: 936937 (1 m) 965014 (2 m)• USB Input Tool Direct (2 m): 06AFM380DNote: Please separately purchase USB-ITPAK since there is no data output switch on the measurement instrument. • Input Tool Series IT-016U (USB Keyboard Signal Conversion Type): 264-016-10 IT-007R (RS-232C Communication Conversion Type): 264-007• Connecting Cables for U-WAVE-T (160 mm): 02AZD790D For foot switch: 02AZE140D• Contact points for Mitutoyo’s dial indicators*3• Interchangeable backs for SERIES 2 models*4• Digimatic Mini-Processor DP-1VA LOGGER: 264-505• Measuring stands*5 *3 Refer to pages F-57 to F-60 for details. *4 Refer to page F-61 for details. *5 Refer to pages F-84 to F-91 for details.Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).ABSOLUTE Digimatic Indicator ID-FSERIES 543 —with Back-litLCD Screen• Multi-functional.• GO/±NG judgment function: If a judgment result shows an out of tolerance condition, the display backlighting changes from green to red.• An analog bar indicator has been integrated to make upper/lower limit and turnover point reading more comfortable. • The ABS (absolute) scale restores the last origin position*1 automatically when the indicator is turned on, and realizes high reliability by eliminating over-speed errors.• Easy-to-read large LCD readout with the character height of 8.5 mm. • External power supply type: an AC adapter is a standard accessory. Does not require battery replacement.• The resolution can be switched between 0.001 mm/0.01 mm (or 0.001 in/0.0005 in/0.0001 in/0.00005 in).• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems. (Refer to page A-3)543-551543-553Multi-functional model Green indication for GO judgmentRed indication for ±NG judgment*1 Regarding origin setting, refer to “Origin Setting of Digimatic Indicators” on page F-25.SPECIFICATIONSMetricOrder No.*2Range (mm)Resolution (mm)Maximum permissible error (mm)Measuring force*4 MPL (N)Net mass (g)MPEE*3Hysteresis MPEHRepeatability MPER543-55125.40.001/ 0.01(selectable)0.0030.0020.0021.8 or lessApprox. 240543-55750.80.0032.3 or lessApprox. 330543-55350.80.006Inch/MetricOrder No.*2RangeResolutionMaximum permissible errorMeasuring force*4 MPL (N)Net mass (g)MPEE*3Hysteresis MPEHRepeatability MPER543-5521 in /25.4 mm0.00005/ 0.0001/ 0.0005/ 0.001 in, 0.001/ 0.01 mm(selectable)±0.0001 in/0.003 mm0.00010 in /0.002 mm0.00010 in /0.002 mm1.8 or lessApprox. 240543-5582 in /50.8 mm±0.0001 in/0.003 mm2.3 or lessApprox. 330543-5542 in /50.8 mm±0.00025 in/0.006 mm*2 To denote your AC power cable add the following sufxes to the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, K for KC, No sufx is required for JIS/100 V*3 Error of indication for the total measuring range*4 The orientation for use can be from vertical (contact point pointing downward) to horizontal (spindle in horizontal orientation). To use the upside-down (contact point pointing upward), the auxiliary spindle spring (optional) is required.ISO/JIS typeASME/ANSI/AGD typeDigimatic IndicatorsComparison measuring instruments which ensure high quality, high accuracy and reliability.DIMENSIONSUnit: in543-551543-553, 543-5571143.366ø19.285.283.2 ø8 0-0.0097.3ø4.8 110.697.319.565.352Ball contact (ø3)901312(threaded: M2.5×0.45)Unit: mm543-55243.311ø19.266ø4.8 ø8 0-0.0097.384.857.783.2702619.540.8Ball contact (ø3)901312(threaded: M2.5×0.45)21BZB005(thread: No. 4-48UNF)3.282.600.681/41.661.02ø0.760.432.273.302.671.70ø0.19ø0.375 0-0.0012Ball contact (ø0.12)Ball contact (ø0.12)21BZB005(thread: No.4-48UNF)952.622.050.68ø0.3750-0.00120.431.70ø0.762.603.281/44.323.35543-554, 543-558An inspection certicate is supplied as standard. Refer to page U-9 for details.ISO/JIS TypeASME/ANSI/AGD Type
元のページ ../index.html#365