F-70FMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.•Specially designed for easy viewing of dial.• The dial face obliquely faces upward, allowing users to read the graduations from the user's side. It is convenient when probing on the side of a large workpiece and the workbench is high.• Using the universal holder allows easy hole centering. The dial face always faces upward when the indicator is rotated, which makes reading easy.Dial Test IndicatorSERIES 513 — Horizontal (20° Tilted Face), Vertical, and Parallel TypesGraduation: 0.01 mmRange: 0.8 mm Carbide contact point 513-454-10E/10A/10T17.4 mmContact point No. 103006Graduation: 0.0005 inRange: 0.03 in Carbide contact point 513-452-10E/10T0.65 inContact point No. 133195 With revolution counter Carbide contact point 513-445-10E/10A/10TContact point No. 10301115.2 mmGraduation: 0.002 mmRange: 0.4 mmGraduation: 0.01mmRange: 1.6mm With revolution counter Carbide contact point 513-444-10E/10A/10TContact point No. 10300617.4 mmGraduation: 0.01 mmRange: 1.6 mmGraduation: 0.01 mmRange: 0.8 mm Carbide contact point 513-484-10E/10A/10TContact point No. 10300617.4 mmGraduation: 0.002 mmRange: 0.2 mm Carbide contact point 513-485-10EContact point No. 10301115.2 mmAn inspection certicate is supplied as standard. Refer to page U-9 for details.Note: 513-4XX-10 is indicated on the dial face. But the Order No. for the set provided with the stem etc. has a suffix (E or A or T) at the end.