F-76FMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Universal Holder (screw clamp)•A universal holder is an attachment used to mount a dial test indicator in a machine tool spindle so that it can be used to align the spindle axis with a workpiece feature such as a hole center, or a machine axis with an edge. (See diagram below.) It also gives some protection against accidental impacts on the indicator.Universal holderContact point (for Metric Models Only)ø0.5 mm contact pointø0.7 mm contact pointø1 mm contact point (Carbide)ø2 mm contact point (Carbide)ø3 mm contact point (Carbide)190547 (L2=11.2 mm)190549 (L2=17.4 mm)190656 (L2=41.0 mm)190548 (L2=11.2 mm)190550 (L2=17.4 mm)190655 (L2=41.0 mm)136756 (L2=8.6 mm)103017 (L2=11.2 mm)103013 (L2=17.4 mm)137746 (L2=33.3 mm)136235 (L2=41.0 mm)136104 (L2=8.6 mm)103010 (L2=11.2 mm)103006 (L2=17.4 mm)129949 (L2=33.3 mm)136013 (L2=41.0 mm)Stemsø4 mm (0.157 inch DIA.)ø8 mm(0.315 inch DIA.)0.375 inch DIA.102036102822102081Swivel ClampsFor ø4 mm stem and ø8 mm stem, and dovetailFor 0.157 inch DIA. stem and 0.375 inch DIA. stem, and dovetail900321900322Holding Bars9×9 mm900209 (Length: 100 mm)ø8 mm (0.315 inch DIA)900211 (Length: 115 mm)0.25×0.5 in953639 (Length: 2 in)900306 (Length: 4 in)21CZA234 (ø8 mm stem)21CZA232 (0.25 inch DIA. stem)21CZA230 (ø6 mm stem)For ø6 mm stem, ø8 mm stem, and dovetailSpanner301336ø2 mm contact point (Ruby)21CZA209 (L2=11.2 mm)21CZA201 (L2=17.4 mm)21CZA211 (L2=41.0 mm)136758 (L2=8.6 mm)103018 (L2=11.2 mm)103014 (L2=17.4 mm)137747 (L2=33.3 mm)136236 (L2=41.0 mm)902053øD contact pointM1.7×0.352 mmL2pocket type dial test indicatorunit: mmunit: mmOrder No.d1d290205368900321489003220.157 in0.375 inød1ød2ø6ø18612.210.916.227.55.830ø6ø6ø6Note: Suitable for height gages with a scriber section of 12.7×6.35 mm.M7.4×0.54ø1557(81)ø6 0-0.0360°

元のページ  ../index.html#417