F-83FMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Optional accessories Dial protection cover: 21DZA000Recommended dial indicators (optional)• ‌Metric models: 2046AB: Dial indicator (Graduation: 0.01 mm) 2109AB-10: Dial indicator (Graduation: 0.001 mm)• Inch models: ‌2803AB-10 (Graduation: 0.0001 in)Dial Snap GageSERIES 201201-101Anvil 40(104.5)(44)40φ1613.5)Dial indicatorprotection armClampAdjustmentnutAdjustmentnutWorkpiece supportHeat insulating coverAnvil Dial indicatorprotection arm(44.6)(44)(12)40ø1640DIMENSIONS Unit: mmSPECIFICATIONSMetricOrder No.Range (mm)Parallelism (µm)Measuring force* (N)201-1010 - 25515±3201-10225 - 50201-10350 - 75201-10475 - 100201-105100 - 125201-106125 - 150201-107150 - 175201-108175 - 200201-109200 - 225201-110225 - 250201-111250 - 275201-112275 - 300InchOrder No.Range (in)Parallelism (in)Measuring force* (N)201-1510 - 10.0002515±3201-1521 - 2201-1532 - 3201-1543 - 4201-1554 - 5201-1565 - 6201-1576 - 7201-1587 - 8201-1598 - 9201-1609 - 10201-16110 - 11201-16211 - 12* Measuring force is that force present before an indicator is installed and is determined at the point where the spindle is retracted 1 mm from the rest position.Note: The dial indicator and protection cover are optional.Dial Indicator ApplicationsComparison measuring instruments which ensure high quality, high accuracy and reliability.• Enables single-handed comparison measurement of cylinder diameters, etc. even during machining.• Measuring faces: Carbide.• The anvil gage head can be moved up to 25 mm by turning the adjustment nut.• The anvil gage head position can be xed by turning the clamp.• The gage head on the dial indicator side can be moved up to 2 mm.• Equipped with workpiece support.• Flatness of measuring face: 1 μm• Repeatability of indication: 2 μm or better (repeatability of indicators is not included)• The dial indicator and protection cover are optional. Also, some dial indicators and protection covers cannot be used with the dial snap gage. Consult Mitutoyo if intending to use dial indicators which are not recommended.

元のページ  ../index.html#424