G-10GMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.SPECIFICATIONSResolution 0.01 µm/Accuracy 0.2 µm modelOrder No.542-715 (Standard)542-716 (Low measuring force)Measuring range10 mmResolution0.01 µm (0.05 µm, 0.1 µm, 0.5 µm, 1 µm can be selected from the counter)Measuring accuracy (20 °C)*10.2 µmRepeatability (20 °C)*10.1 µm (2 )Retrace error (20 °C)*10.1 µmMeasuring forceContact point downwards0.65 N or lessApprox. 0.12 NContact point horizontal0.55 N or lessNot applicableContact point upwards0.45 N or lessNot applicablePosition detection methodOptical reflection type linear encoderDetectable operation speedIn normal measurement: 700 mm/sec; for peak detection: 120 mm/secMass of gage headApprox. 370 gContact pointCarbide tipped, Sø3 mm (M2.5 (P=0.45) ×5 mm), standard contact point: 901312Stemø15 mmBearingLinear ball typeOutput cable lengthApprox. 2 mOperating temperature (humidity) ranges0 to 40 °C (Reference temperature 20 °C)/20 to 80% RH (non-condensing)Storage temperature (humidity) ranges−10 to 60 °C/20 to 80% RH (non-condensing)Counter SpecificationsDisplay range±999.99999 mmFunctions Zero-setting, presetting, direction changeover, tolerance judgment (3 steps/5 steps), RS-RINKPeak hold functionYesInterfaceRS-232C, USB (only for SENSORPAK), Digimatic (Printer: DP-1VA LOGGER)*3, I/O Connector External output• RS-232C: counting data • Digimatic output: counting data*3 • I/O connector: counting data (simplified BCD), tolerance judgment result, simplified analog outputExternal controlZero-setting, presetting, data hold, peak measurement mode selection, peak clearPower supplySuppplied AC Adapter, or 12 to 24 V DC, max. 700 mAPower consumption8.4 W (max. 700 mA), ensure at least 1 A power supply per unit.Mass of counterApprox. 900 g (AC Adapter excluded)Standard accessoriesWrench for contact point, rubber boot, stand, washer (for counter), AC Adapter, AC cord, DC plug, user's manual, inspection certificateResolution 0.005 µm/Accuracy 0.1 µm modelOrder No.542-720 (Standard)542-721 (Low measuring force)Measuring range10 mmResolution0.005 µm (0.01 µm, 0.05 µm, 0.1 µm can be selected from the counter)Measuring accuracy (20 °C)*10.1 µmRepeatability (20 °C)*10.02 µm (2σ)Retrace error (20 °C)*10.05 µmMeasuring forceContact point downwards0.65 N or lessApprox. 0.1 NContact point horizontal0.55 N or lessNot applicableContact point upwards0.45 N or lessNot applicablePosition detection methodUltra-high accuracy transmission type linear encoderDetectable operation speedIn normal measurement: 250 mm/secMass of gage headApprox. 370 gContact pointCarbide sphere SR5 (M2.5 (P=0.45) ×5 mm), standard contact point: 120058Stemø15 mmBearingLinear ball typeOutput cable lengthApprox. 2 mOperating temperature (humidity) ranges15 to 25 °C (Reference temperature 20 °C)/30 to 60% RH (non-condensing)Storage temperature (humidity) ranges−10 to 60 °C/20 to 80% (non-condensing)*2Counter SpecificationsDisplay range±99.999995 mmFunctions Zero-setting, presetting, direction changeover, tolerance judgment (3 steps/5 steps), RS-RINKPeak hold functionNoInterfaceRS-232C, USB (only for SENSORPAK), Digimatic (Printer: DP-1VA LOGGER)*3, I/O Connector External output• RS-232C: counting data • Digimatic output: counting data*3 • I/O connector: counting data (simplified BCD), tolerance judgment result, simplified analog outputExternal controlZero-setting, presetting, data holdPower supplySuppplied AC Adapter, or +12 to 24 V DC, max. 700 mAPower consumption8.4 W (max. 700 mA), ensure at least 1 A power supply per unit.Mass of counterApprox. 900 g (AC Adapter excluded)Standard accessoriesWrench for contact point, rubber boot, stand, washer (for counter), AC Adapter, AC cord, DC plug, user's manual, inspection certificate*1 Applies when used with counter. *2 The storage temperature/humidity ranges after unpacking are the same as the operating temperature/humidity ranges.*3 Digimatic output shall be up to 6 digits of data. For data of 7 digits or more, all digits will not be output to the display.Refer to the Linear Gage Brochure (E13007) for more details.Catalog No. E13007(4)Sensor SystemsLinear Displacement SensorsLINEAR GAGE13007_8_リニヤゲージ.indd 22019/04/01 9:53
元のページ ../index.html#447