G-13GLinear GagesIdeal for integration into harsh environments such as automation applicationsMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Optional Accessories• I/O output connector (with cover): 02ADB440• SPC cable (0.5 m): 02ADD950• SPC cable (1 m): 936937• SPC cable (2 m): 965014• Measurement data loading software: SENSORPAKNote: The Digimatic connecting cable doubles as a RS Link cable.• Conversion plug for without origin point mark: 21HZA195 (For connecting LG100 to 542-075/ 542-071)• Conversion plug for with origin point mark: 21HZA196 (For connecting LG100 to 542-073)EH Counter SERIES 542 — Panel mount, Multi-function Type with RS-232C Communication Functions•Two types are available for this model: a 1-axis display and a 2-axis display, both of which enable addition or subtraction calculations between two gages.•Multifunctional counter equipped with zero-setting, presetting, tolerance judgment.•RS-232C and USB are equipped as standard. Data transfer to a PC is possible. (USB is supported only by Mitutoyo SENSORPAK.)•A multi-point measuring system (max. 20 points and max. 10 units) can easily be congured with the built-in RS Link networking function. Refer to "Quick Guide to Precision Measuring Instruments" on page G-19 for details of the RS link.•Employs DIN size (144×72 mm) and mount-on-panel conguration to facilitate system integration.SPECIFICATIONSOrder No.542-075*542-071*542-073*542-072*Number of axes to be displayed1 axis2 axesQuantizing error±1 countMaximum input frequency2.5 MHz (2-phase square wave) —Resolution( ) indicates maximum display range0.01 mm (±9999.99 mm)/0.0005 in (±99.9995 in)0.005 mm (±999.995 mm)/0.00005 in (±9.99995 in)0.001 mm (±999.999 mm)/0.00005 in (±9.99995 in)0.0005 mm (±99.9995 mm)/0.000005 in (±0.999995 in)0.0001 mm (±99.9999 mm)/0.000005 in (±0.999995 in) [Parameter set]Automatic setting by gageTolerance judgment displayLED display (3 steps: Amber, Green, Red/5 steps: Amber, Amber flashing, Green, Red flashing, Red)InterfaceRS-232C/USB/parameter selection via digimatic (only DP-1VA LOGGER, digimatic mini-processor can be connected) (USB used only with SENSORPAK.)Selection by parameter from 3-step, 5-step, or simple BCD Total tolerance judgment output (when tolerance function is enabled)Analog output (1 V to 4 V)Input/outputControl outputOpen-collectorControl inputDisplay BANK switching, peak mode, presetting, display hold, hold per axis: open-collector or no-voltage contact signal (with/without contact point)Power supplyVoltageSupplied AC adapter, or 12 to 24 V DCConsumption8.4 W (max. 700 mA)Ensure at least 1 A is available per unit.Operating temperature (humidity) ranges 0 to 40 °C (RH 20 to 80%, non-condensing)Storage temperature (humidity) ranges–10 to 50 °C (RH 20 to 80%, non-condensing)AC adapter/AC cableAC adapter: 357651/AC cable: 02ZAA000, AC cable (Japan): 02ZAA000*, AC cable (USA): 02ZAA010*, AC cable (EU): 02ZAA020*, AC cable (UK): 02ZAA030*, AC cable (China): 02ZAA040*, AC cable (Korea): 02ZAA050*Applicable gage headLGK, LGB, LGB2A conversion plug 21HZA195 is required to connect LG100 (The origin point detection function is disabled)LG100 (A conversion plug 21HZA196 is required)LGS, IDMassApprox. 760 gApprox. 800 gApprox. 800 gApprox. 800 g* To denote your AC power cable add the following suffixes to the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, K for KC, C and No suffix are required for PSE. For those models of the Order No. with Suffix "1", an AC adapter is not supplied as a standard accessory.542-075542-071542-073542-072Unit: mmDIMENSIONS542-0752711.21375.1137156.714472(3.1)148.2Indicates AC adapter installation(Approx. 10°)2134DC12-24VRS LINKINOUTRS-232CI/O700mADC INCode No.ModelSerial No.MADE IN JAPAN********************Kawasaki, JapanINPUTAB*******Kawasaki, JapanCode No.ModelSerial No.MADE IN JAPAN*************2134DC12-24VRS LINKINOUTRS-232CI/O700mADC INBAINPUT*******Kawasaki, JapanCode No.ModelSerial No.MADE IN JAPAN*************2134DC12-24VRS LINKINOUTRS-232CI/O700mADC INDC IN700mAI/ORS-232COUTINRS LINKDC12-24V4312*******Kawasaki, JapanCode No.ModelSerial No.MADE IN JAPAN*************BAINPUTCode No.ModelSerial No.MADE IN JAPAN********************Kawasaki, Japan2134DC12-24VRS LINKINOUTRS-232CI/O700mADC IN6813868138681386813868138Refer to the Linear Gage Brochure (E13007) for more details.Catalog No. E13007(4)Sensor SystemsLinear Displacement SensorsLINEAR GAGE13007_8_リニヤゲージ.indd 22019/04/01 9:53

元のページ  ../index.html#450