G-17GLinear GagesIdeal for integration into harsh environments such as automation applicationsVL-50-B/50S-B LitematicSERIES 318 — High-accuracy/resolution Measuring Machine•With a measuring force of only 0.01 N, the Litematic is ideal for measuring easily deformed workpieces or high-accuracy components.•For workpieces for which 0.01 N is insufcient, either the 0.15 N or 1 N model is recommended.•The motor-driven spindle moves up/down and stops when the contact point touches the workpiece. Then the maximum, minimum and runout values are measured under a constant force.•High resolution of 0.01 µm, and wide measuring range of 50 mm.•Measuring system VL-50-B, integrated display type, and VL-50S-B, a separate display type, are available.•The measuring table supplied with VL-50-B is ceramic, which is corrosion free, for easier maintenance and storage.•The spindle is made of low thermal expansion material.•Motor life is approximately 100,000 opera-tions, after which replacement is advisable.Optional Stand for VL-50S-B 15 250 80 270 ø50 300 48 80 56 157 Clamp screw 365 ColumnHeight adjustment nutBaseBracketHex socket set screw(4-M4×0.7)Litematic headUnit: mm957460Optional Accessories• Foot switch: 937179T• Dedicated stand: 957460*5• SPC cable (1 m): 936937*6• SPC cable (2 m): 965014*6• VL weight part: 02AZE375*7• Recommended spare contact points: Shell type:101118 (Approx. 0.02 N)*8 Carbide tipped spherical contact point, ø7.5: 120059 (Approx. 0.03 N)*8 Carbide tipped spherical contact point, ø10.5: 120060 (Approx. 0.06 N)*8 Carbide tipped needle contact point, ø0.45: 120066 (Approx. 0.01 N)*8*5 Only VL-50S is available. *6 Refer to page G-19 for details of the RS link.*7 Not applicable to 318-223 and 318-228*8 Values in parentheses indicate the measuring force of a 0.01 N model tted with the respective optional pointsSPECIFICATIONSOrder No.318-221*4318-222*4318-223*4318-226*4318-227*4318-228*4ModelVL-50-BVL-50-15-BVL-50-100-BVL-50S-BVL-50S-15-BVL-50S-100-BMeasuring range0 to 50 mm (0 to 2 in)Resolution0.01/0.1/1.0 µm (0.0000005 in/0.000005 in/0.00005 in)Display unit8 digits/14 mm (0.6 in) character height (without signs)Scale typeReflection type linear encoderStroke51.5 mm (2 in) (when using a standard contact point)Measuring accuracy (20 °C)*1(0.5 + L/100) µm L=arbitrary measuring length (mm)Accuracy guaranteed temperature*220±1 °CRepeatability*1=0.05 µmMeasuring force*10.01 N0.15 N*31 N*30.01 N0.15 N*31 N*3Feed speedMeasurementApprox. 2 mm/s (0.08 in/s) or 4 mm/s (0.16 in/s) (changeable by parameter)Fast feedApprox. 8 mm/s (0.3 in/s)Contact pointø3 mm carbide tipped (fixing screw: M2.5 (P=0.45) ×5), standard contact point: 901312Measuring tableø100 (ceramic, grooved, removable)—InputFoot switch input (when optional foot switch is used) External ControlOutputDigimatic output/RS-232C output (changeable by parameter)RatingPower supply85 to 264 V AC (depends on AC adapter)Power consumptionMax. 12 W (12 V, 1 A)Standard AccessoriesAC adapter: 357651, Power cable: 02ZAA000, Grounding wire: 934626, AC cable (Japan): 02ZAA000, AC cable (USA): 02ZAA010, AC cable (EU): 02ZAA020, AC cable (UK): 02ZAA030, AC cable (China): 02ZAA040, AC cable (Korea): 02ZAA050Hex wrench (2 pcs. for fixing contact point and for removing fixing bracket)*1 Normal measurement using standard contact point.*2 Under less temperature change, and hot or cold direct air flow should be avoided.*3 0.15 N, 1 N types are factory-installed option.*4 To denote your AC power cable add the following suffixes to the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, F for SAA, K for KC, C and No suffix are required for PSE.Note: Motor life is approximately 100,000 operations, after which replacement is advisable.This maintenance factor is particularly important to bear in mind when the machine is used frequently, such as on a production line.318-221318-226PM18515017082.95ø3212.5PM2PM3TEACHLIMITPRESETZEROMODETIRC.TUNITGO/NGMAXMINWORKT.H 29 80 14.8 172 186.4 50.2 80.2 (11°)4-M4×0.7 depth 10 56 Scale unitDisplay unitConnecting cable 2 mDIMENSIONSUnit: mm 202 300 103.2 56 380.2 Measuring table ø100Clamp screw for measuring tableStylusDisplayOperation switch318-221318-226Refer to the Litematic Brochure(E13006) for more details.Mitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.
元のページ ../index.html#454